Filters

All, or only Basic Products

Results 121 - 180 of 617
17 996 Ft
(14 170 Ft excl VAT)
Baseball, Black (19/20) Single

This ingenious little 3” windscreen has been specifically designed for interior boom pole use. The Baseball greatly reduces the ‘swooshes’ (unwanted noise artifacts caused by laminar airflow across the mic) induced by fast boom swings and other rapid movements.

17 996 Ft
(14 170 Ft excl VAT)
49 987 Ft
(39 360 Ft excl VAT)
Baseball, Black (21/22) 3-pack

This ingenious little 3” windscreen has been specifically designed for interior boom pole use. The Baseball greatly reduces the ‘swooshes’ (unwanted noise artifacts caused by laminar airflow across the mic) induced by fast boom swings and other rapid movements.

49 987 Ft
(39 360 Ft excl VAT)
17 996 Ft
(14 170 Ft excl VAT)
Baseball, Black (21/22) Single

This ingenious little 3” windscreen has been specifically designed for interior boom pole use. The Baseball greatly reduces the ‘swooshes’ (unwanted noise artifacts caused by laminar airflow across the mic) induced by fast boom swings and other rapid movements.

17 996 Ft
(14 170 Ft excl VAT)
49 987 Ft
(39 360 Ft excl VAT)
Baseball, Black (24/25) 3-pack

This ingenious little 3” windscreen has been specifically designed for interior boom pole use. The Baseball greatly reduces the ‘swooshes’ (unwanted noise artifacts caused by laminar airflow across the mic) induced by fast boom swings and other rapid movements.

49 987 Ft
(39 360 Ft excl VAT)
17 996 Ft
(14 170 Ft excl VAT)
Baseball, Black (24/25) Single

This ingenious little 3” windscreen has been specifically designed for interior boom pole use. The Baseball greatly reduces the ‘swooshes’ (unwanted noise artifacts caused by laminar airflow across the mic) induced by fast boom swings and other rapid movements.

17 996 Ft
(14 170 Ft excl VAT)
28 207 Ft
(22 210 Ft excl VAT)
BBG Windjammer

Suitable for all mono BBG Windshields
Product Code: 021801

28 207 Ft
(22 210 Ft excl VAT)
10 668 Ft
(8 400 Ft excl VAT)
Black Lavalier Windjammer - single

Designed for use with Lavalier microphones worn on the outside of clothing, the Lavalier Windjammer (or Furry) is the most heavy-duty of Rycote's subminiature Lavalier microphone products. It is suitable for use in windy outdoor interview conditions, and greatly reduces microphone noise and clothes rustle, while also providing effective wind protection.

10 668 Ft
(8 400 Ft excl VAT)
10 668 Ft
(8 400 Ft excl VAT)
Black Ristretto Lavalier Windjammer - single

Tie-pin, or Lavalier microphones as they are widely known, are ideal for discreet use in broadcast interview situations, their compact dimensions ensuring that they do not draw the eye on camera. Their convenient size means that they are even used by some radio broadcast engineers, despite their appearance not being an issue in that medium.

10 668 Ft
(8 400 Ft excl VAT)
10 668 Ft
(8 400 Ft excl VAT)
Blue Lavalier Windjammer - single

Designed for use with Lavalier microphones worn on the outside of clothing, the Lavalier Windjammer (or Furry) is the most heavy-duty of Rycote's subminiature Lavalier microphone products. It is suitable for use in windy outdoor interview conditions, and greatly reduces microphone noise and clothes rustle, while also providing effective wind protection.

10 668 Ft
(8 400 Ft excl VAT)
16 650 Ft
(13 110 Ft excl VAT)
Boom Adaptor w/Lever & XLR Holder MkIII

The Boom Adapter with Ratchet Lever from Rycote enables the Modular suspension to be mounted onto boompoles and fishpoles. It features a brass 3/8"-16 female thread for complete integration with the studs located on the poles.

16 650 Ft
(13 110 Ft excl VAT)
11 989 Ft
(9 440 Ft excl VAT)
Boom Pole Adaptor

The Rycote Boom Adapter will enable the Modular Suspension to be mounted onto boom poles and fish poles. The Boom Adapter features a brass 3/8" female thread for complete integration with the studs located on boom poles.

11 989 Ft
(9 440 Ft excl VAT)
4 331 Ft
(3 410 Ft excl VAT)
Brass 3/8" M to 5/8" F screw adaptor

The Rycote 047302 is a brass mic stand adapter. This adapter attaches a mic or other equipment with a 3/8" threaded connection to a 5/8" mic stand threaded stud.

4 331 Ft
(3 410 Ft excl VAT)
8 674 Ft
(6 830 Ft excl VAT)
Brass Shoe Adaptor with 1/4-inch male thread

This Rycote Hot Shoe to 1/4"-20 Adapter is used to mount accessories with a 1/4"-20 female thread onto a camera's shoe mount.

8 674 Ft
(6 830 Ft excl VAT)
6 998 Ft
(5 510 Ft excl VAT)
Camera Mic Clamp / Hot Shoe Adaptor

This Rycote CC-Hotshoe Camera Clamp Adapter allows standard shoe-mountable items to be used in a 21/25mm camera clamp. The adapter ships with a removable sleeve that acts as a shim for providing a snug fit into 25mm clamps (Sony and Canon).

6 998 Ft
(5 510 Ft excl VAT)
11 582 Ft
(9 120 Ft excl VAT)
Canon DM 50 Mini Windjammer

Canon DM 50 Mini Windjammer

11 582 Ft
(9 120 Ft excl VAT)
16 650 Ft
(13 110 Ft excl VAT)
Canon XF 300/305 Mini Windjammer

The Mini Windjammer for the Canon XF300 & XF305 provides excellent wind isolation for capturing audio in high-wind environments.

16 650 Ft
(13 110 Ft excl VAT)
16 650 Ft
(13 110 Ft excl VAT)
Canon XF100 Mini Windjammer

The Mini Windjammer for the Canon XF100 provides excellent wind isolation for capturing audio in high-wind environments.

16 650 Ft
(13 110 Ft excl VAT)
29 997 Ft
(23 620 Ft excl VAT)
Connbox CB1 (XLR-3F)

The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB1 hardwired (XLR-3F tail not detachable) and is suitable for mono microphones with a 3-pin XLR connector.

29 997 Ft
(23 620 Ft excl VAT)
44 260 Ft
(34 850 Ft excl VAT)
Connbox CB10 (LEMO)

The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB10 (LEMO) is suitable for single Schoeps CCM_L in a WS 9 Kit. The Lemo tail is hardwired to the Connbox.

44 260 Ft
(34 850 Ft excl VAT)
122 365 Ft
(96 350 Ft excl VAT)
Connbox CB11 (2MZL Detachable)

The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB11 (2MZL Detachable) is suitable for a pair of Sennheiser MKH 8040s or 8050s in a WS AC MS Kit (XY/MS) or an ORTF Windshield Kit. The MZL tails are detachable from the Connbox.

122 365 Ft
(96 350 Ft excl VAT)
46 863 Ft
(36 900 Ft excl VAT)
Connbox CB2 (XLR-3F Detachable)

The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB2 is suitable for long shotgun microphones with 3-pin XLR. The XLR-3F tail is detachable from the Connbox.

46 863 Ft
(36 900 Ft excl VAT)
59 982 Ft
(47 230 Ft excl VAT)
Connbox CB3 (2XLR-3F)

The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox 3 is suitable for most M/S stereo pairs with two 3-pin XLRs.

59 982 Ft
(47 230 Ft excl VAT)
59 982 Ft
(47 230 Ft excl VAT)
Connbox CB4 (XLR-5F)

The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB4 is suitable for single shank stereo microphones with 5-pin XLR.

59 982 Ft
(47 230 Ft excl VAT)
59 881 Ft
(47 150 Ft excl VAT)
Connbox CB5 (LEMO Detachable)

The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox 5 is suitable for single Schoeps CCM in a WS 9 Kit with Lemo connector. The Lemo tail is detachable from the Connbox.

59 881 Ft
(47 150 Ft excl VAT)
89 967 Ft
(70 840 Ft excl VAT)
Connbox CB9 (MZL)

The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB9 (MZL) is suitable for single Sennheiser MKH 8020, 8040 or 8050 in a WS 9 Kit.

89 967 Ft
(70 840 Ft excl VAT)
23 317 Ft
(18 360 Ft excl VAT)
Cyclone Adaptor for PCS-Boom w/ XLR holder – (Fits Cyclone Windshield Kits)

The Cyclone Adaptor for PCS-Boom Connector (Connector not supplied) , is the neatest, lightest and simplest way to integrate the Rycote Professional Connection System into your existing Rycote Cyclone Kit. The Cyclone Adaptor replaces your Cyclone’s existing boom adaptor and has a built-in, fixed PCS tip, along with a unique new XLR holder with 360° adjustability.

23 317 Ft
(18 360 Ft excl VAT)
68 351 Ft
(53 820 Ft excl VAT)
Cyclone Cable, 260mm (LEMO)

The Rycote Cyclone LEMO Cable (16”) is designed for use with Cyclone Series Windshield systems. It features a Schoeps LEMO connector on one end and a male 3XLR connector on the other. The cable comes with a red silicone sleeve.

68 351 Ft
(53 820 Ft excl VAT)
91 961 Ft
(72 410 Ft excl VAT)
Cyclone Cable, 260mm (MZL)

The 6" 17032 Cyclone 3-Pin XLRM to MZL Cable from Rycote is an optional cable for the Cyclone small windshield kit that is specific to the Sennheiser MKH8000 series microphones.

91 961 Ft
(72 410 Ft excl VAT)
24 765 Ft
(19 500 Ft excl VAT)
Cyclone Cable, XLR-3M to XLR-3F, 290mm

The Cyclone Windshield Kit is supplied with an ultra-soft, flexible Mogami cable.

24 765 Ft
(19 500 Ft excl VAT)
11 341 Ft
(8 930 Ft excl VAT)
Cyclone Pair of Universal Lyre (62-shore)

Universal Lyre, 62 shore - with Black rigid part & Black Soft-grip, suitable for microphones of 19/25 mm, ideal for compact, lighter microphones.

11 341 Ft
(8 930 Ft excl VAT)
11 341 Ft
(8 930 Ft excl VAT)
Cyclone Pair of Universal Lyre (72-shore)

Universal Lyre, 72 shore - with Black rigid part & Grey Soft-grip, suitable for microphones of 19/25 mm diameter. Suitable for microphones, such as Sanken CS3, Sennheiser MKH416, Rode NTG-3, Schoeps CMIT 5U, Neumann KMR 81i

11 341 Ft
(8 930 Ft excl VAT)
76 645 Ft
(60 350 Ft excl VAT)
Cyclone Windjammer, Large

The Windjammer first introduced by Rycote is a high quality synthetic fur-cover, which provides the highest possible protection against extreme wind-noise.

76 645 Ft
(60 350 Ft excl VAT)
76 645 Ft
(60 350 Ft excl VAT)
Cyclone Windjammer, Medium

The Windjammer first introduced by Rycote is a high quality synthetic fur-cover, which provides the highest possible protection against extreme wind-noise.

76 645 Ft
(60 350 Ft excl VAT)
76 645 Ft
(60 350 Ft excl VAT)
Cyclone Windjammer, Small

The Windjammer first introduced by Rycote is a high quality synthetic fur-cover, which provides the highest possible protection against extreme wind-noise.

76 645 Ft
(60 350 Ft excl VAT)
313 207 Ft
(246 620 Ft excl VAT)
Cyclone Windshield Kit, Large

Cyclone, Large premium windshield system for shotgun microphones. Features grey 3D-Tex® material, “multi-suspension” with Lyre® Technology for transparent, category leading wind and shock isolation. Perfect for Sennheiser MKH 60, Schoeps Super-CMIT etc.

313 207 Ft
(246 620 Ft excl VAT)
313 207 Ft
(246 620 Ft excl VAT)
Cyclone Windshield Kit, Medium

Cyclone, prémium, közepes szélpajzs rendszer "kispuska" és rövid "kispuska" mikrofonokhoz. Szürke 3D-Tex® anyaggal, többszörös felfüggesztéssel a Lyre® technológia segítségével a transzparens, csúcsminőségű szél- és rázkódásvédelemért. Tökéletes választás a Sennheiser MKH 416, Schoeps CMIT 5, stb. használatakor.

313 207 Ft
(246 620 Ft excl VAT)
389 865 Ft
(306 980 Ft excl VAT)
Cyclone Windshield Kit, Small (LEMO)

Ideal for a multitude of outdoor ENG, broadcast, and film applications, this small Cyclone Windshield Kit from Rycote features a two-piece "Z-Locking" basket design that magnetically affixes around your microphone, isolating the mic from wind-caused noise.

389 865 Ft
(306 980 Ft excl VAT)
389 865 Ft
(306 980 Ft excl VAT)
Cyclone Windshield Kit, Small (MZL)

deal for a multitude of outdoor ENG, broadcast, and film applications, this small Cyclone Windshield Kit from Rycote features a two-piece "Z-Locking" basket design that magnetically affixes around your microphone, isolating the mic from wind-caused noise.

389 865 Ft
(306 980 Ft excl VAT)
313 207 Ft
(246 620 Ft excl VAT)
Cyclone Windshield Kit, Small (XLR)

Cyclone, Small (XLR) premium windshield system for small diaphragm condenser microphones with XLR connectivity. Features grey 3D-Tex® material, “multi-suspension” with Lyre® Technology for transparent, category leading wind and shock isolation. Perfect for Sennheiser MKH 50, Schoeps MiniCMIT, etc.

313 207 Ft
(246 620 Ft excl VAT)
73 304 Ft
(57 720 Ft excl VAT)
Cyclone Windshield Only, Large

Massive wind noise reduction - asymmetric basket covered with 3D-Tex® material provides enormous benefits in terms of surface turbulence & acoustic impedance.

73 304 Ft
(57 720 Ft excl VAT)
73 304 Ft
(57 720 Ft excl VAT)
Cyclone Windshield Only, Medium

Massive wind noise reduction - asymmetric basket covered with 3D-Tex® material provides enormous benefits in terms of surface turbulence & acoustic impedance.

73 304 Ft
(57 720 Ft excl VAT)
73 304 Ft
(57 720 Ft excl VAT)
Cyclone Windshield Only, Small

Massive wind noise reduction - asymmetric basket covered with 3D-Tex® material provides enormous benefits in terms of surface turbulence & acoustic impedance.

73 304 Ft
(57 720 Ft excl VAT)
33 312 Ft
(26 230 Ft excl VAT)
Cyclone/Perfect For Cable, XLR-3M to Angled XLR-3F, 260mm

The Cyclone Windshield Kit is supplied with ultra-soft, flexible Mogami cable, fitted with gold pin Neutrik XX-series XLR connectors

33 312 Ft
(26 230 Ft excl VAT)
10 008 Ft
(7 880 Ft excl VAT)
DIY Kit (Mwj Fur, Lining & Velcro)

Diy Kit (Mwj Fur, Lining & Velcro)
The DIY Kit from Rycote features matching pieces of acoustically transparent lining and fur. It comes with a single, trimmable strip of touch fastener to enable you to custom-make your own windshield solution. With shorter, mini windjammer fur, this convenient and easy-to-use kit is designed to accommodate custom-built wind-shielding solutions for uniquely shaped microphones. It is suitable for camera operators who need to craft a custom solution for onboard camera microphones.

10 008 Ft
(7 880 Ft excl VAT)
10 020 Ft
(7 890 Ft excl VAT)
DIY Kit (Sft Fur, Lining & Velcro)

Diy Kit (Sft Fur, Lining & Velcro)
The DIY Kit from Rycote features matching pieces of acoustically transparent lining and fur. It comes with a single, trimmable strip of touch fastener to enable you to custom-make your own windshield solution. With longer, softie fur, this convenient and easy-to-use kit is designed to accommodate custom-built wind-shielding solutions for uniquely shaped microphones. It is suitable for camera operators who need to craft a custom solution for onboard camera microphones.

10 020 Ft
(7 890 Ft excl VAT)
16 650 Ft
(13 110 Ft excl VAT)
DPA 4080 Mini Windjammer

Designed for use with Lavalier microphones worn on the outside of clothing, the Lavalier Windjammer (or Furry) is the most heavy-duty of Rycote's subminiature Lavalier microphone products.

16 650 Ft
(13 110 Ft excl VAT)
16 650 Ft
(13 110 Ft excl VAT)
DPA 4099 Mini Windjammer

Affordable but offering excellent, effective protection against wind noise, our DPA 4099 Windjammer is easy-to-fit slip-on fur for use when recording outside or in a windy condition.

16 650 Ft
(13 110 Ft excl VAT)
59 982 Ft
(47 230 Ft excl VAT)
Duck Raincover 1

Protect your Modular Windshield 1 Kit from the bad weather with the Rycote Duck Rain Cover!

59 982 Ft
(47 230 Ft excl VAT)
59 982 Ft
(47 230 Ft excl VAT)
Duck Raincover 2

Protect your Windshield 2 Kit from the bad weather with the Rycote Duck Rain Cover 2!

59 982 Ft
(47 230 Ft excl VAT)
59 982 Ft
(47 230 Ft excl VAT)
Duck Raincover 3

Protect your Windshield Kit 3 or Super-Shield Kit Small from the bad weather with the Rycote Duck Rain Cover 3!

59 982 Ft
(47 230 Ft excl VAT)
59 982 Ft
(47 230 Ft excl VAT)
Duck Raincover 4

Protect your Modular Windshield Kit 4 and 5 and Super-Shield Kit Medium and Large from the bad weather with the Rycote Duck Rain Cover 4!

59 982 Ft
(47 230 Ft excl VAT)
59 982 Ft
(47 230 Ft excl VAT)
Duck Raincover 6

Protect your Modular Windshield Kit 6 from the bad weather with the Rycote Duck Rain Cover 6!

59 982 Ft
(47 230 Ft excl VAT)
69 964 Ft
(55 090 Ft excl VAT)
Duck Raincover 7

Protect your Modular Windshield Kit 7 from the bad weather with the Rycote Duck Rain Cover 7!

69 964 Ft
(55 090 Ft excl VAT)
69 964 Ft
(55 090 Ft excl VAT)
Duck Raincover 8

Protect your Modular Windshield Kit 8 from the bad weather with the Rycote Duck Rain Cover 8!

69 964 Ft
(55 090 Ft excl VAT)
16 650 Ft
(13 110 Ft excl VAT)
Edirol (Roland) R09 Mini Windjammer

The Mini Windjammer for the Edirol R09 provides excellent wind isolation for capturing audio in high-wind environments.

16 650 Ft
(13 110 Ft excl VAT)
16 650 Ft
(13 110 Ft excl VAT)
Edirol RO5/Tascam DR05 Mini Windjammer

Suitable for Edirol RO5/Tascam DR05.

16 650 Ft
(13 110 Ft excl VAT)
11 582 Ft
(9 120 Ft excl VAT)
Extended Medium Mini Windjammer

Suitable for camera-mounted mics, for use over a foam windshield of 40 mm diameter and 75 mm long.

11 582 Ft
(9 120 Ft excl VAT)
16 650 Ft
(13 110 Ft excl VAT)
Extended Small Mini Windjammer

Extended Small Mini Windjammer

16 650 Ft
(13 110 Ft excl VAT)
33 312 Ft
(26 230 Ft excl VAT)
Extension 1

The Windshield Extension 1 is designed to extend the Modular Windshield 4 (330mm) to make a Windshield 5 (400mm).

33 312 Ft
(26 230 Ft excl VAT)
33 312 Ft
(26 230 Ft excl VAT)
Extension 2

The Windshield Extension 2 is designed to extend the Modular Windshield 4 (330mm) to make a Windshield 6 (450mm).

33 312 Ft
(26 230 Ft excl VAT)
Results 121 - 180 of 617