|
19 990 Ft
(15 740 Ft nettó)
|
5cm SGM Foam & Windjammer (19/22)
The Shotgun Mic Foam and Windjammer Combo from Rycote is a slip on wind solution for shotgun microphones. The foam features a 5cm inner depth and a standard hole opening. |
19 990 Ft
(15 740 Ft nettó) |
|
19 990 Ft
(15 740 Ft nettó)
|
5cm SGM Foam & Windjammer (24/25)
he Shotgun Mic Foam and Windjammer Combo from Rycote is a slip on wind solution for shotgun microphones. The foam features a 5cm inner depth and a large hole opening. |
19 990 Ft
(15 740 Ft nettó) |
|
39 980 Ft
(31 480 Ft nettó)
|
5cm SGM Foam (19/22) (10 Pack)
Suitable for pencil microphones, with slots no further than 5 cm from the front of the mic. |
39 980 Ft
(31 480 Ft nettó) |
|
4 331 Ft
(3 410 Ft nettó)
|
5cm SGM Foam (19/22) (Single)
Suitable for pencil microphones, with slots no further than 5 cm from the front of the mic. |
4 331 Ft
(3 410 Ft nettó) |
|
39 980 Ft
(31 480 Ft nettó)
|
5cm SGM Foam (24/25) (10 Pack)
Suitable for shotgun microphones, with slots no further than 5 cm from the front of the mic. |
39 980 Ft
(31 480 Ft nettó) |
|
4 331 Ft
(3 410 Ft nettó)
|
5cm SGM Foam (24/25) (Single)
Suitable for shotgun microphones, with slots no further than 5 cm from the front of the mic. |
4 331 Ft
(3 410 Ft nettó) |
|
16 650 Ft
(13 110 Ft nettó)
|
5cm SGM Mini Windjammer for foam
This Rycote Windjammer is intended to cover an existing Rycote foam windscreen and deliver added wind protection while capturing audio outdoors. |
16 650 Ft
(13 110 Ft nettó) |
|
52 273 Ft
(41 160 Ft nettó)
|
5cm Super-Softie (19/22)
Slip-on Windshield with the new 3D-Tex material and open-cell foam suitable for shotgun microphones only, with slots no further than 5cm from the front of the mic and a diameter of 19-22mm. |
52 273 Ft
(41 160 Ft nettó) |
|
52 273 Ft
(41 160 Ft nettó)
|
5cm Super-Softie (24/25)
Slip-on Windshield with the new 3D-Tex material and open-cell foam suitable for shotgun microphones only, with slots no further than 5cm from the front of the mic and a diameter of 24-25mm. |
52 273 Ft
(41 160 Ft nettó) |
|
Hívjon az árért
|
6AA internal battery holder for Nomad / Maxx
6AA battery holder for Nomad / Maxx. |
Hívjon az árért |
|
792 099 Ft
(623 700 Ft nettó)
|
8 ch. Mic/Line A/D module with Direct Out, DSD/DXD Premium
The AKD8D/P offers ultra-low distortion and noise floor at low levels whilst reducing latency even more. Another remarkable feature of the Merging Audio Interfaces is the low power consumption. The new components reduce that further by saving over 2 Watts per board which could be as much as 12 Watts on a fully loaded Horus. |
792 099 Ft
(623 700 Ft nettó) |
|
565 785 Ft
(445 500 Ft nettó)
|
8 channel Mic/Line A/D module with Direct Out, up to 192 kHz
The AKD8D/P offers ultra-low distortion and noise floor at low levels whilst reducing latency even more. Another remarkable feature of the Merging Audio Interfaces is the low power consumption. The new components reduce that further by saving over 2 Watts per board which could be as much as 12 Watts on a fully loaded Horus. |
565 785 Ft
(445 500 Ft nettó) |
|
212 344 Ft
(167 200 Ft nettó)
|
A-15PIN
Cradle for A10-RX with 15-pin D-type adapter. For use with Sony video cameras that have slot-in for wireless,
or Sony extension units with slot-in for wireless. The A-15PIN allows the A10-RX to be used in the Sony slot
directly, without the need for external cables. The audio is passed to the internal slot as two-channel AES
digital audio. |
212 344 Ft
(167 200 Ft nettó) |
|
32 817 Ft
(25 840 Ft nettó)
|
A-BOOM - Accessory plate for A10-TX
Accessory plate for mounting the A10-TX onto microphone boom poles with 3/8 inch thread top screw. |
32 817 Ft
(25 840 Ft nettó) |
|
34 544 Ft
(27 200 Ft nettó)
|
A-BOOM 2
The A-BOOM 2 is a boom pole mount designed specifically for the A20-TX transmitter. It mounts to the top of a cabled or cableless boom pole. It can be positioned facing up or down the boom pole, and the onscreen text of the A20-TX screen will conveniently rotate to allow you to read it at the right orientation. |
34 544 Ft
(27 200 Ft nettó) |
|
13 462 Ft
(10 600 Ft nettó)
|
A-CASE - Neoprene Case for A10-TX
Neoprene Case for A10-TX. |
13 462 Ft
(10 600 Ft nettó) |
|
14 478 Ft
(11 400 Ft nettó)
|
A-CLIP - Belt Clip for A10-TX
Belt Clip for A10-TX Transmitter (included with A10-TX). |
14 478 Ft
(11 400 Ft nettó) |
|
13 513 Ft
(10 640 Ft nettó)
|
A-FILTER
Adds improved RF immunity for balanced microphones and cables, specifically when connected to digital
wireless transmitters like the A10-TX. Circuit board solder Installation required. |
13 513 Ft
(10 640 Ft nettó) |
|
51 435 Ft
(40 500 Ft nettó)
|
A-FILTER-R
Right-angle RF filter circuit board. Fits Cable Techniques low profile XLR. Pack of 4 |
51 435 Ft
(40 500 Ft nettó) |
|
30 937 Ft
(24 360 Ft nettó)
|
A-FLIP A-SL adapter to change orientation of A10-RX
This A-SL adapter changes the orientation of an A10-RX in an SL-6 or A10-RACK. |
30 937 Ft
(24 360 Ft nettó) |
