Találatok: 101 - 120 / 2876
19 990 Ft
5cm SGM Foam & Windjammer (19/22)

The Shotgun Mic Foam and Windjammer Combo from Rycote is a slip on wind solution for shotgun microphones. The foam features a 5cm inner depth and a standard hole opening.

19 990 Ft
19 990 Ft
5cm SGM Foam & Windjammer (24/25)

he Shotgun Mic Foam and Windjammer Combo from Rycote is a slip on wind solution for shotgun microphones. The foam features a 5cm inner depth and a large hole opening.

19 990 Ft
39 980 Ft
5cm SGM Foam (19/22) (10 Pack)

Suitable for pencil microphones, with slots no further than 5 cm from the front of the mic.

39 980 Ft
4 331 Ft
5cm SGM Foam (19/22) (Single)

Suitable for pencil microphones, with slots no further than 5 cm from the front of the mic.

4 331 Ft
39 980 Ft
5cm SGM Foam (24/25) (10 Pack)

Suitable for shotgun microphones, with slots no further than 5 cm from the front of the mic.

39 980 Ft
4 331 Ft
5cm SGM Foam (24/25) (Single)

Suitable for shotgun microphones, with slots no further than 5 cm from the front of the mic.

4 331 Ft
16 650 Ft
5cm SGM Mini Windjammer for foam

This Rycote Windjammer is intended to cover an existing Rycote foam windscreen and deliver added wind protection while capturing audio outdoors.

16 650 Ft
52 273 Ft
5cm Super-Softie (19/22)

Slip-on Windshield with the new 3D-Tex material and open-cell foam suitable for shotgun microphones only, with slots no further than 5cm from the front of the mic and a diameter of 19-22mm.

52 273 Ft
52 273 Ft
5cm Super-Softie (24/25)

Slip-on Windshield with the new 3D-Tex material and open-cell foam suitable for shotgun microphones only, with slots no further than 5cm from the front of the mic and a diameter of 24-25mm.

52 273 Ft
Hívjon az árért
6AA internal battery holder for Nomad / Maxx

6AA battery holder for Nomad / Maxx.

Hívjon az árért
792 099 Ft
8 ch. Mic/Line A/D module with Direct Out, DSD/DXD Premium

The AKD8D/P offers ultra-low distortion and noise floor at low levels whilst reducing latency even more. Another remarkable feature of the Merging Audio Interfaces is the low power consumption. The new components reduce that further by saving over 2 Watts per board which could be as much as 12 Watts on a fully loaded Horus.

792 099 Ft
565 785 Ft
8 channel Mic/Line A/D module with Direct Out, up to 192 kHz

The AKD8D/P offers ultra-low distortion and noise floor at low levels whilst reducing latency even more. Another remarkable feature of the Merging Audio Interfaces is the low power consumption. The new components reduce that further by saving over 2 Watts per board which could be as much as 12 Watts on a fully loaded Horus.

565 785 Ft
212 344 Ft
A-15PIN

Cradle for A10-RX with 15-pin D-type adapter. For use with Sony video cameras that have slot-in for wireless,
or Sony extension units with slot-in for wireless. The A-15PIN allows the A10-RX to be used in the Sony slot
directly, without the need for external cables. The audio is passed to the internal slot as two-channel AES
digital audio.

212 344 Ft
32 817 Ft
A-BOOM - Accessory plate for A10-TX

Accessory plate for mounting the A10-TX onto microphone boom poles with 3/8 inch thread top screw.

32 817 Ft
34 544 Ft
A-BOOM 2

The A-BOOM 2 is a boom pole mount designed specifically for the A20-TX transmitter. It mounts to the top of a cabled or cableless boom pole. It can be positioned facing up or down the boom pole, and the onscreen text of the A20-TX screen will conveniently rotate to allow you to read it at the right orientation.

34 544 Ft
13 462 Ft
A-CASE - Neoprene Case for A10-TX

Neoprene Case for A10-TX.

13 462 Ft
14 478 Ft
A-CLIP - Belt Clip for A10-TX

Belt Clip for A10-TX Transmitter (included with A10-TX).

14 478 Ft
13 513 Ft
A-FILTER

Adds improved RF immunity for balanced microphones and cables, specifically when connected to digital
wireless transmitters like the A10-TX. Circuit board solder Installation required.

13 513 Ft
51 435 Ft
A-FILTER-R

Right-angle RF filter circuit board. Fits Cable Techniques low profile XLR. Pack of 4

51 435 Ft
30 937 Ft
A-FLIP A-SL adapter to change orientation of A10-RX

This A-SL adapter changes the orientation of an A10-RX in an SL-6 or A10-RACK.

30 937 Ft
Találatok: 101 - 120 / 2876