11 989 Ft (9 440 Ft nettó)
|
1/4" InVision Video Adaptor
1/4" Adaptor with 19mm washer. |
11 989 Ft (9 440 Ft nettó) |
2 413 Ft (1 900 Ft nettó)
|
10 X Snap Rivets
10 X Snap Rivets |
2 413 Ft (1 900 Ft nettó) |
16 650 Ft (13 110 Ft nettó)
|
18/32 Mini Windjammer for foam
This Rycote Windjammer is intended to cover an existing Rycote foam windscreen and deliver added wind protection while capturing audio outdoors. |
16 650 Ft (13 110 Ft nettó) |
3 620 Ft (2 850 Ft nettó)
|
18/32 SDM Foam Black (Single)
Protect your small diagram microphone from wind noise and the elements with the Rycote 18/32 Small Diaphragm Mic Foam. |
3 620 Ft (2 850 Ft nettó) |
32 004 Ft (25 200 Ft nettó)
|
250mm Stereo Lemo Connbox (Red)
250mm Stereo Lemo Connbox (Red) |
32 004 Ft (25 200 Ft nettó) |
21 336 Ft (16 800 Ft nettó)
|
3/8" Boom Adaptor Swivel
The 3/8" Boom Adaptor Swivel from Rycote allows devices such as portable audio recorders and cameras with female 1/4" threading to mount on a 3/8" male thread commonly found on mic stands and boom poles. |
21 336 Ft (16 800 Ft nettó) |
29 997 Ft (23 620 Ft nettó)
|
3/8" Boom Adaptor Swivel with 10cm Hot Shoe Extension
This Rycote Thread Adaptor is constructed from brass and features a 3/8" female and 1/4" male ends. The thread adaptor also includes a hotshoe 3/8" adaptor and 10cm hotshoe extension to accommodate multiple devices. |
29 997 Ft (23 620 Ft nettó) |
24 651 Ft (19 410 Ft nettó)
|
3/8" Boom Adaptor Swivel with Camera Clamp/Hot Shoe Adaptor
This Rycote Thread Adaptor is constructed from brass and features a 3/8" female and 1/4" male ends. The thread adaptor also includes a hotshoe 3/8" adaptor and CC-hotshoe camera clamp adaptor. |
24 651 Ft (19 410 Ft nettó) |
8 331 Ft (6 560 Ft nettó)
|
3/8" Boom Swivel with Lever
3/8inch Boom Swivel with Lever |
8 331 Ft (6 560 Ft nettó) |
14 986 Ft (11 800 Ft nettó)
|
3/8"F to 1/4" Thread / Hot Shoe Adaptor
This Rycote Thread Adaptor is constructed from brass and features a 3/8" female and 1/4" male ends. The thread adaptor also includes a hotshoe 3/8" adaptor. The adaptor is ideal for microphone attachments and accessory shoes. |
14 986 Ft (11 800 Ft nettó) |
10 668 Ft (8 400 Ft nettó)
|
3/8"F to 1/4"M Thread Adaptor
This Rycote Thread Adaptor is constructed from brass and features a 3/8" female and 1/4" male ends. The adaptor is ideal for microphone attachments and accessory shoes. |
10 668 Ft (8 400 Ft nettó) |
16 650 Ft (13 110 Ft nettó)
|
30/55 Mini Windjammer for foam
This Rycote Windjammer is intended to cover an existing Rycote foam windscreen and deliver added wind protection while capturing audio outdoors. |
16 650 Ft (13 110 Ft nettó) |
5 334 Ft (4 200 Ft nettó)
|
30/55 Reporter Mic Foam (Single)
Protect your microphone from wind noise and the elements with the Rycote FWS-30/55 Reporter Mic Foam. |
5 334 Ft (4 200 Ft nettó) |
16 650 Ft (13 110 Ft nettó)
|
35/50 Mini Windjammer for foam
This Rycote Windjammer is intended to cover an existing Rycote foam windscreen and deliver added wind protection while capturing audio outdoors. |
16 650 Ft (13 110 Ft nettó) |
5 334 Ft (4 200 Ft nettó)
|
35/50 Reporter Mic Foam (Single)
Protect your microphone from wind noise and the elements with the Rycote FWS-35/50 Reporter Mic Foam. |
5 334 Ft (4 200 Ft nettó) |
16 650 Ft (13 110 Ft nettó)
|
40/55 Mini Windjammer for foam
This Rycote Windjammer is intended to cover an existing Rycote foam windscreen and deliver added wind protection while capturing audio outdoors. |
16 650 Ft (13 110 Ft nettó) |
5 334 Ft (4 200 Ft nettó)
|
40/55 Reporter Mic Foam (Single)
Protect your microphone from wind noise and the elements with the Rycote FWS-40/55 Reporter Mic Foam. |
5 334 Ft (4 200 Ft nettó) |
10 668 Ft (8 400 Ft nettó)
|
45/100 Large Diaphragm Mic Foam Single
Protect your large diagram microphone from wind noise and the elements with the Rycote 45/100 Large Diaphragm Mic Foam. |
10 668 Ft (8 400 Ft nettó) |
10 008 Ft (7 880 Ft nettó)
|
Back-to-Back Clips
The Rycote Back-to-Back Clips for Microphones (for Stereo Suspension) can hold 19-25mm diameter microphones and slab-sided MKH microphones in M/S stereo. Soft grip surface on the internal edges prevent microphones from slipping or rotating inside the clips. |
10 008 Ft (7 880 Ft nettó) |
16 650 Ft (13 110 Ft nettó)
|
Boom Adaptor w/Lever & XLR Holder MkIII
The Boom Adapter with Ratchet Lever from Rycote enables the Modular suspension to be mounted onto boompoles and fishpoles. It features a brass 3/8"-16 female thread for complete integration with the studs located on the poles. |
16 650 Ft (13 110 Ft nettó) |
11 989 Ft (9 440 Ft nettó)
|
Boom Pole Adaptor
The Rycote Boom Adapter will enable the Modular Suspension to be mounted onto boom poles and fish poles. The Boom Adapter features a brass 3/8" female thread for complete integration with the studs located on boom poles. |
11 989 Ft (9 440 Ft nettó) |
4 331 Ft (3 410 Ft nettó)
|
Brass 3/8" M to 5/8" F screw adaptor
The Rycote 047302 is a brass mic stand adapter. This adapter attaches a mic or other equipment with a 3/8" threaded connection to a 5/8" mic stand threaded stud. |
4 331 Ft (3 410 Ft nettó) |
8 674 Ft (6 830 Ft nettó)
|
Brass Shoe Adaptor with 1/4-inch male thread
This Rycote Hot Shoe to 1/4"-20 Adapter is used to mount accessories with a 1/4"-20 female thread onto a camera's shoe mount. |
8 674 Ft (6 830 Ft nettó) |
6 998 Ft (5 510 Ft nettó)
|
Camera Mic Clamp / Hot Shoe Adaptor
This Rycote CC-Hotshoe Camera Clamp Adapter allows standard shoe-mountable items to be used in a 21/25mm camera clamp. The adapter ships with a removable sleeve that acts as a shim for providing a snug fit into 25mm clamps (Sony and Canon). |
6 998 Ft (5 510 Ft nettó) |
29 997 Ft (23 620 Ft nettó)
|
Connbox CB1 (XLR-3F)
The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB1 hardwired (XLR-3F tail not detachable) and is suitable for mono microphones with a 3-pin XLR connector. |
29 997 Ft (23 620 Ft nettó) |
44 260 Ft (34 850 Ft nettó)
|
Connbox CB10 (LEMO)
The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB10 (LEMO) is suitable for single Schoeps CCM_L in a WS 9 Kit. The Lemo tail is hardwired to the Connbox. |
44 260 Ft (34 850 Ft nettó) |
122 365 Ft (96 350 Ft nettó)
|
Connbox CB11 (2MZL Detachable)
The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB11 (2MZL Detachable) is suitable for a pair of Sennheiser MKH 8040s or 8050s in a WS AC MS Kit (XY/MS) or an ORTF Windshield Kit. The MZL tails are detachable from the Connbox. |
122 365 Ft (96 350 Ft nettó) |
Hívjon az árért
|
Connbox CB12 (2LEMO-Detachable)
The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox 12 is suitable for an ORTF stereo pair of Schoeps CCM in an ORTF Windshield kit (AE). |
Hívjon az árért |
46 863 Ft (36 900 Ft nettó)
|
Connbox CB2 (XLR-3F Detachable)
The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB2 is suitable for long shotgun microphones with 3-pin XLR. The XLR-3F tail is detachable from the Connbox. |
46 863 Ft (36 900 Ft nettó) |
59 982 Ft (47 230 Ft nettó)
|
Connbox CB3 (2XLR-3F)
The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox 3 is suitable for most M/S stereo pairs with two 3-pin XLRs. |
59 982 Ft (47 230 Ft nettó) |
59 982 Ft (47 230 Ft nettó)
|
Connbox CB4 (XLR-5F)
The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB4 is suitable for single shank stereo microphones with 5-pin XLR. |
59 982 Ft (47 230 Ft nettó) |
59 881 Ft (47 150 Ft nettó)
|
Connbox CB5 (LEMO Detachable)
The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox 5 is suitable for single Schoeps CCM in a WS 9 Kit with Lemo connector. The Lemo tail is detachable from the Connbox. |
59 881 Ft (47 150 Ft nettó) |
89 967 Ft (70 840 Ft nettó)
|
Connbox CB9 (MZL)
The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB9 (MZL) is suitable for single Sennheiser MKH 8020, 8040 or 8050 in a WS 9 Kit. |
89 967 Ft (70 840 Ft nettó) |
59 982 Ft (47 230 Ft nettó)
|
Duck Raincover 1
Protect your Modular Windshield 1 Kit from the bad weather with the Rycote Duck Rain Cover! |
59 982 Ft (47 230 Ft nettó) |
59 982 Ft (47 230 Ft nettó)
|
Duck Raincover 2
Protect your Windshield 2 Kit from the bad weather with the Rycote Duck Rain Cover 2! |
59 982 Ft (47 230 Ft nettó) |
59 982 Ft (47 230 Ft nettó)
|
Duck Raincover 3
Protect your Windshield Kit 3 or Super-Shield Kit Small from the bad weather with the Rycote Duck Rain Cover 3! |
59 982 Ft (47 230 Ft nettó) |
59 982 Ft (47 230 Ft nettó)
|
Duck Raincover 4
Protect your Modular Windshield Kit 4 and 5 and Super-Shield Kit Medium and Large from the bad weather with the Rycote Duck Rain Cover 4! |
59 982 Ft (47 230 Ft nettó) |
59 982 Ft (47 230 Ft nettó)
|
Duck Raincover 6
Protect your Modular Windshield Kit 6 from the bad weather with the Rycote Duck Rain Cover 6! |
59 982 Ft (47 230 Ft nettó) |
69 964 Ft (55 090 Ft nettó)
|
Duck Raincover 7
Protect your Modular Windshield Kit 7 from the bad weather with the Rycote Duck Rain Cover 7! |
69 964 Ft (55 090 Ft nettó) |
69 964 Ft (55 090 Ft nettó)
|
Duck Raincover 8
Protect your Modular Windshield Kit 8 from the bad weather with the Rycote Duck Rain Cover 8! |
69 964 Ft (55 090 Ft nettó) |
33 312 Ft (26 230 Ft nettó)
|
Extension 1
The Windshield Extension 1 is designed to extend the Modular Windshield 4 (330mm) to make a Windshield 5 (400mm). |
33 312 Ft (26 230 Ft nettó) |
33 312 Ft (26 230 Ft nettó)
|
Extension 2
The Windshield Extension 2 is designed to extend the Modular Windshield 4 (330mm) to make a Windshield 6 (450mm). |
33 312 Ft (26 230 Ft nettó) |
33 312 Ft (26 230 Ft nettó)
|
Extension 3
The Windshield Extension 3 is designed to extend the Modular Windshield 4 (330mm) to make a Windshield 7 (500mm). |
33 312 Ft (26 230 Ft nettó) |
33 312 Ft (26 230 Ft nettó)
|
Extension 4
The Windshield Extension 4 is designed to extend the Modular Windshield 4 (330mm) to make a Windshield 8 (590mm). |
33 312 Ft (26 230 Ft nettó) |
33 312 Ft (26 230 Ft nettó)
|
Extension 5
The Windshield Extension 295 is designed to extend the Modular Windshield 4 (330mm) to make a Windshield 11 (625mm). |
33 312 Ft (26 230 Ft nettó) |
26 035 Ft (20 500 Ft nettó)
|
Extension 6
The Windshield Extension 220 is designed to extend the Modular Windshield 295 to make a Windshield 8J (515mm). Suitable for the Sennheiser MKH 8070 (with MZX XLR module attached and no MZF filter). |
26 035 Ft (20 500 Ft nettó) |
31 090 Ft (24 480 Ft nettó)
|
Hi Wind Cover 1
The Hi Wind Cover 1 is designed to fit the Modular Windshield WS 1 Kit to offer up to 35dB in wind noise reduction. |
31 090 Ft (24 480 Ft nettó) |
29 997 Ft (23 620 Ft nettó)
|
Hi Wind Cover 10
The Hi Wind Cover 10 is designed to fit the Modular Windshield WS 10 Kit to offer up to 35dB in wind noise reduction. |
29 997 Ft (23 620 Ft nettó) |
31 090 Ft (24 480 Ft nettó)
|
Hi Wind Cover 2
The Hi Wind Cover 2 is designed to fit the Modular Windshield WS 2 Kit to offer up to 35dB in wind noise reduction. |
31 090 Ft (24 480 Ft nettó) |
29 997 Ft (23 620 Ft nettó)
|
Hi Wind Cover 295
The Hi Wind Cover 295 is designed to fit the Modular Windshield WS 295 Kit to offer up to 35dB in wind noise reduction. |
29 997 Ft (23 620 Ft nettó) |
31 090 Ft (24 480 Ft nettó)
|
Hi Wind Cover 3
The Hi Wind Cover 3 is designed to fit the Modular Windshield WS 3 Kit to offer up to 35dB in wind noise reduction. |
31 090 Ft (24 480 Ft nettó) |
31 090 Ft (24 480 Ft nettó)
|
Hi Wind Cover 4
The Hi Wind Cover 4 is designed to fit the Modular 'Mono' Windshield 4 to offer up to 35dB in wind noise reduction. |
31 090 Ft (24 480 Ft nettó) |
31 090 Ft (24 480 Ft nettó)
|
Hi Wind Cover 5
The Hi Wind Cover 5 is designed to fit the Modular Windshield Kit to offer up to 35dB in wind noise reduction. |
31 090 Ft (24 480 Ft nettó) |
31 090 Ft (24 480 Ft nettó)
|
Hi Wind Cover 6
The Hi Wind Cover 6 is designed to fit the Modular Windshield WS 6 Kit to offer up to 35dB in wind noise reduction. |
31 090 Ft (24 480 Ft nettó) |
37 300 Ft (29 370 Ft nettó)
|
Hi Wind Cover 7
The Hi Wind Cover 7 is designed to fit the Modular Windshield WS 7 Kit to offer up to 35dB in wind noise reduction. |
37 300 Ft (29 370 Ft nettó) |
37 300 Ft (29 370 Ft nettó)
|
Hi Wind Cover 8
The Hi Wind Cover 8 is designed to fit the Modular Windshield WS 8 Kit to offer up to 35dB in wind noise reduction. |
37 300 Ft (29 370 Ft nettó) |
28 118 Ft (22 140 Ft nettó)
|
Hi Wind Cover 8J
Add extra wind-noise protection to your Modular Windshield with this durable and discreet fleece cover. |
28 118 Ft (22 140 Ft nettó) |
31 090 Ft (24 480 Ft nettó)
|
Hi Wind Cover 9
Suitable for the Windshield WS 9 Kit. |
31 090 Ft (24 480 Ft nettó) |
23 432 Ft (18 450 Ft nettó)
|
Hi Wind Cover Rode Blimp
Add extra wind-noise protection to your Modular Windshield with this durable and discreet fleece cover. |
23 432 Ft (18 450 Ft nettó) |
12 725 Ft (10 020 Ft nettó)
|
Hot Shoe 3/8"Adaptor
The Rycote 037302 Hot Shoe Adaptor with 3/8" Male Thread lets you attach any fitting with a 3/8" thread to a camera hot shoe. |
12 725 Ft (10 020 Ft nettó) |