Call for pricing
|
BC80
The Ambient Audio BC-80 Boom Case is an unpadded hard plastic case made to carry an Ambient Audio QX580 or QP470 boom. |
Call for pricing |
Call for pricing
|
BNC-TA3F
The Ambient Recording 90° BNC Male to TA3F Timecode-Input Cable is used to feed time code into the SD 552 Sound Devices 552 Field Mixer. |
Call for pricing |
160 782 Ft (126 600 Ft excl VAT)
|
CL-1
ONLY ONE UNIT LEFT ON STOCK - Interface for connecting external keyboards to Sound Devices 7-Series audio recorders. Also includes programmable toggle switch for remote roll functions, status LEDs, and hard wire contact closures for custom wiring. Connects via C. Link port on the recorders. |
160 782 Ft (126 600 Ft excl VAT) |
Call for pricing
|
CL-2
Remote 30 mm linear fader for the 788T Digital Recorder. Mounts directly to most boom poles. Equipped with four programmable logic switches. Connects to the 788T through C-Link. |
Call for pricing |
Call for pricing
|
CL-6
Input Controller for 664 & 688 . Adds dedicated front panel controls for inputs 7-12. Also offers LED output meters and additional recording controls. |
Call for pricing |
Call for pricing
|
CL-8
External controller for 788T and 788T-SSD recorders. Designed for over the shoulder or cart applications. Provides control of pre- or post-fader gain, input routing, high-pass filter, input limiters, polarity reversal, input solo, and slate mic. Connects and powered from 788T from USB. |
Call for pricing |
Call for pricing
|
Connbox CB12 (2LEMO-Detachable)
The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox 12 is suitable for an ORTF stereo pair of Schoeps CCM in an ORTF Windshield kit (AE). |
Call for pricing |
Call for pricing
|
CS-3
Production case with high-quality strap for use with 302, 702, 702T, 722, and 744T recorders and MixPre-D; NP-type battery compartment and accessory pouch for wireless. Made by CamRade for Sound Devices. |
Call for pricing |
178 079 Ft (140 220 Ft excl VAT)
|
CS-688
Production Case for 688 and 664 ,made of 1000-denier Cordura® nylon with a rigid plastic frame. Holds Mixer, CL-6 and SL-6 simultanteosuly. Includes Suede Shoulder Strap and Rainhood. Made by PortaBrace for Sound Devices. |
178 079 Ft (140 220 Ft excl VAT) |
Call for pricing
|
HBN-SQN3
The 13.1' HBN-SQN3 Camera Loom Cable from Ambient Recording features 5-Pin to XLR-3/M with 3.5mm TRS connectors. |
Call for pricing |
Call for pricing
|
HBN10-10
The 13.1' HBN10-10 Hirose 10-Pin Male to Hirose 10-Pin Female Breakaway Cable from Ambient Recording is used with Sound Devices 442 / 442N, 552, SQN4 (old designs), Cooper CS104, and TW Electronic LP44 / LP4 32 Mixers. |
Call for pricing |
Call for pricing
|
HBN10-7
The HBN10-7 Straight Breakaway Cable with 2 x 2 + 2 Leads from Ambient Recording is equipped with Hirose 10-pin male to 7-pin XLR male connectors and is suitable for devices such as the Sound Devices 442 / 442N, 552, SQN4 (old designs), Cooper CS104 and the TW Electronic LP44 / LP4 32. |
Call for pricing |
Call for pricing
|
HBN10Y10-35
The 13.1' HBN10Y10-35 Hirose 10-Pin Male to Hirose 10-Pin Male Breakaway Cable from Ambient Recording comes with a Y cable and has a Hirose 10-pin female connector on one end and dual 3-pin XLR male connectors on the other end with a signal return via a TRS mini plug on the coiled cord. |
Call for pricing |
Call for pricing
|
HBN10Y10-5
The 13.1' HBN10Y10-5 Hirose 10-Pin Male to 7-Pin XLR Male Breakaway Cable from Ambient Recording comes with a Y cable and has a 7-pin XLR female connector on one end and dual 3-pin XLR male connectors on the other end with a signal return via a 5-pin XLR female connector. |
Call for pricing |
Call for pricing
|
HBN12T-10
The HBN12T-10 from Ambient Recording is a straight mixer/camera loom that is equipped with Tajimi 12-pin to Hirose 10F connectors. |
Call for pricing |
Call for pricing
|
HBN12T-7
The HBN12T-7 from Ambient Recording is a straight mixer/camera loom that is equipped with Tajimi 12-pin to XLR-7M connectors. |
Call for pricing |
Call for pricing
|
HBS-ALEXA
The Ambient Recording HBS-ALEXA Coiled Mixer Cable features two 3-pin XLR female and a 3.5mm TRS plug on one end and a 5-pin XLR male connector on the other. |
Call for pricing |
Call for pricing
|
HBS-SQN3Y7-35M
The 4.5 to 16.4' HBS-SQN3Y7-35M Coiled Breakaway Cable for SQN3 from Ambient Recording comes with a Tuchel 5-pin male to 3-pin XLR male connector and return via TRS mini plug on coiled cord for SQN3. |
Call for pricing |
Call for pricing
|
HBS10Y10-35
The 4.6 to 16.4’ HBS10Y10-35 Hirose 10-Pin Male to Hirose 10-Pin Female Coiled Breakaway Cable from Ambient Recording comes with a Y cable and is used with Sound Devices 442 / 442N, 552, SQN4 (old designs), Cooper CS104, and TW Electronic LP44 / LP4 32 Mixers. |
Call for pricing |
Call for pricing
|
HBS10Y10-35W
The 4.6 to 16.4’ HBS10Y10-35W Hirose 10-Pin Male to Hirose 10-Pin Female Coiled Breakaway Cable from Ambient Recording comes with a Y cable and is used with Sound Devices 442 / 442N, 552, SQN4 (old designs), Cooper CS104, and TW Electronic LP44 / LP4 32 Mixers. |
Call for pricing |