The Rycote INV-2 InVision Microphone Suspension addresses the demand for a professional, Rycote-quality shockmount in the studio, conference settings and speech capturing applications.

INV-3 is suitable for microphones including the AKG C430, Behringer C2, DPA 4021 and Sennheiser MKH8000 series with MZX8000.

The INV-4 is suitable for compact microphones such as the Schoeps CCM series and miniature shotgun mics such as the AKG C747. The 9.5mm Lyre clips feature a reducing sleeve which grips the connector and the cable, leaving the body of the microphone free to be completely covered by a foam.

The INV-5 is suitable for compact microphones such as the Schoeps CCM series when used without a large foam windshield. The single 62 (19/25) Lyre at the front holds a mic body diameter of 19-25mm and the rear single 62 (9.5) Lyre holds connectors of 8-11mm e.g. lemo.

Az INV-6 rövid, 19-25mm átmérőjű, kismembrános kondenzátor mikrofonokhoz alkalmazható, mint pl. a Sennheiser MKH 8020/40/50, MZX XLR moduljukkal használva. A mikrofontartó egy pár Single 72-es (19/25) Lírát is tartalmaz.

The INV-6 Heavy is a heavier grade version of the INV-6 which feature firmer Single 82 (19/25) Lyres which will support microphones used with lightweight windshields in 'run and gun' scenarios.

Mikrofontartó kismembrános kondenzátor mikrofonokhoz, mint pl. a Schoeps CMC-sorozat és "kispuska" mikrofonokhoz, mint a Sennheiser MKH416, beltéri, szivaccsal történő használatra.

INV-8 is suitable for microphones including the Neumann RSM190 and RSM191, Pearl MS8 and MSH10, and Sony ECM 999, ECM 979, and ECM 959.

INV-9 is suitable for microphones of up to 30mm in diameter, such as the Shure SM57 and SM58, and Neumann's KMS105.

INV-BH is suitable for microphones from 19 to 34mm in diameter, up to 500 grams in weight and 50 cm length maximum, with use of the 3/8" female Boom Adaptor.

The INV-Lite 19 Boom Shockmount from Rycote is a discreet, low-profile shockmount which isolates short shotgun microphones (19mm in diameter) from shock and handling noises, when they are used mounted on a boompole.

The INV-Lite 19 Boom Shockmount from Rycote is a discreet, low-profile shockmount which isolates short shotgun microphones (19mm in diameter) from shock and handling noises, when they are used mounted on a boompole.

Rycote have developed a little upgrade for the INV-Lite mount itself, whcih provides enhanced protection from the effects of air-flow over the shock mount, when fast booming.

InVision Stereo Pair Kit is suitable for shotgun microphones from 19-25 mm in diameter

The InVision Table Stand allows a microphone or recorder to be mounted on a flat surface, leaving both hands of the recordist free, and may be used in broadcast studios or for location recording where a desk or other flat surface is available.

The InVision Universal Pop Filter has been designed to optimise vocal performances, utilising a custom mesh capable of attenuating low-frequency vocal pops and thumps by up to 20dB, and causes no audibly detectable high-frequency loss, unlike many ordinary nylon pop screens.

Univerzális mikrofonkosár 18 és 55mm közötti átmérővel rendelkező, maximum 750g tömegű mikrofonokhoz.

Univerzális mikrofonkosár és pop filter 55 és 68mm közötti átmérővel rendelkező, 250g vagy kisebb tömegű mikrofonokhoz (függőleges elhelyezés esetén akár 450g-os mikrofonokhoz is alkalmas). A csomag 1 univerzális pop filter-t és 1 USM VB-L-t tartalmaz.

Universal microphone shock-mount ideal for microphones weighing 400 grammes or less (will hold up to 750 grammes in a vertical position) & between 18mm and 55mm in diameter.

Az InVision USM-L Studio Kit egy teljes felfüggesztő- és pop filter rendszer, amely az univerzális mikrofontartót (USM-L) kombinálja az új univerzális pop filter-rel, hogy egy olyan stúdiómikrofon felfüggesztő- és pop filter rendszert alkosson, ami gyakorlatilag bármilyen mikrofonhoz alkalmas. A csomag 1 univerzális pop filter-t és 1 USM-L-t tartalmaz.