Call for pricing
|
Cisco SB SG300-20, 18+2 GbE ports Switch, incl QoS
Cisco SB SG300-20, 18+2 GbE ports Switch, incl QoS |
Call for pricing |
160 782 Ft (126 600 Ft excl VAT)
|
CL-1
ONLY ONE UNIT LEFT ON STOCK - Interface for connecting external keyboards to Sound Devices 7-Series audio recorders. Also includes programmable toggle switch for remote roll functions, status LEDs, and hard wire contact closures for custom wiring. Connects via C. Link port on the recorders. |
160 782 Ft (126 600 Ft excl VAT) |
Call for pricing
|
CL-12
Linear fader controller for the 688, 664 and 633. Powered by 6-Series USB connection for 688. 633 and 664 require external 5v power via rear USB port.*Not all features available on 664 & 633. |
Call for pricing |
Call for pricing
|
CL-12 Alaia Blonde Maple
Same as CL-12 Classic with the addition of tweleve Penny & Giles high performance linear faders for extra smooth movement. Includes handcrafted Curly Blonde Maple wood side panels & aluminum panels. |
Call for pricing |
Call for pricing
|
CL-2
Remote 30 mm linear fader for the 788T Digital Recorder. Mounts directly to most boom poles. Equipped with four programmable logic switches. Connects to the 788T through C-Link. |
Call for pricing |
Call for pricing
|
CL-6
Input Controller for 664 & 688 . Adds dedicated front panel controls for inputs 7-12. Also offers LED output meters and additional recording controls. |
Call for pricing |
Call for pricing
|
CL-8
External controller for 788T and 788T-SSD recorders. Designed for over the shoulder or cart applications. Provides control of pre- or post-fader gain, input routing, high-pass filter, input limiters, polarity reversal, input solo, and slate mic. Connects and powered from 788T from USB. |
Call for pricing |
998 855 Ft (786 500 Ft excl VAT)
|
CL-9
Linear fader controller for the 788T Digital Recorder. Includes 100 mm linear faders, rotary trim control, adjustable single-band parametric eq, pan control, and solo per input. Rotary level controls for L, R, Aux 1, and Aux 2 tracks and outputs. Also offers two PL comm return inputs. Powered by 788T USB connection. |
998 855 Ft (786 500 Ft excl VAT) |
Call for pricing
|
CL-L Plastic Clip - Large size (10 pieces)
Plastic Clip Large size for COS-11D HWM to fix Main Frame and Mic Boom (10 pieces in 1pack). |
Call for pricing |
Call for pricing
|
CL-LL Plastic Clip - Extra Large size (5 pieces)
Extra Large clip to fix Main Frame and Mic Cable (5 pieces in 1 pack). |
Call for pricing |
Call for pricing
|
CL-S Plastic Clip - Small size (10 pieces)
Plastic Clip Small size for COS-11D HWM to fix Ear Frame and Mic Boom (10 pieces in 1 pack). |
Call for pricing |
Call for pricing
|
CMS-10
The CMS-10 Stereo Mono Switchable Shotgun Microphone from Sanken is a compact, shotgun and M-S stereo microphone designed for use with HD camcorders. WSJ-10 and suspension cylinder included |
Call for pricing |
Call for pricing
|
CMS-2 (NE)
M-S Stereo microphone with holder H-21D, XLR-5M output |
Call for pricing |
120 142 Ft (94 600 Ft excl VAT)
|
CN42 3-Pin XLR AES42 powered stereo cone for TRX742/3
|
120 142 Ft (94 600 Ft excl VAT) |
120 142 Ft (94 600 Ft excl VAT)
|
CNAES 3-Pin XLR stereo AES cone for TRX742/3
|
120 142 Ft (94 600 Ft excl VAT) |
120 142 Ft (94 600 Ft excl VAT)
|
CNANO 3-Pin XLR mono analog cone for TRX742/3
|
120 142 Ft (94 600 Ft excl VAT) |
120 142 Ft (94 600 Ft excl VAT)
|
CNST 5-Pin XLR stereo analog cone for TRX742/3
|
120 142 Ft (94 600 Ft excl VAT) |
793 750 Ft (625 000 Ft excl VAT)
|
CO-100K
An omnidirectional super wide range condenser microphone with unprecedented 20Hz to 100kHz frequency response. |
793 750 Ft (625 000 Ft excl VAT) |
29 997 Ft (23 620 Ft excl VAT)
|
Connbox CB1 (XLR-3F)
The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB1 hardwired (XLR-3F tail not detachable) and is suitable for mono microphones with a 3-pin XLR connector. |
29 997 Ft (23 620 Ft excl VAT) |
44 260 Ft (34 850 Ft excl VAT)
|
Connbox CB10 (LEMO)
The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox CB10 (LEMO) is suitable for single Schoeps CCM_L in a WS 9 Kit. The Lemo tail is hardwired to the Connbox. |
44 260 Ft (34 850 Ft excl VAT) |