Call for pricing
|
Schoeps CUT 1 Variable Low-Cut Filter for Colette, switchable
The CUT 1 prevents the effect of infrasonic disturbances from being passed on to any succeeding device and offsets proximity effect and/or to improve speech intelligibility in reverberant rooms by means of an additional 6 dB/oct rolloff. |
Call for pricing |
Call for pricing
|
Schoeps CUT 2 Variable Low-Cut Filter for Colette, switchable
The CUT 2 prevents the effect of infrasonic disturbances from being passed on to any succeeding device and offsets proximity effect and/or to improve speech intelligibility in reverberant rooms by means of an additional 6 dB/oct rolloff. |
Call for pricing |
Call for pricing
|
Schoeps Double M/S Windshield Set 4V Set including 2*CCM 4V L, 1*CCM 8 L, WSR DMS LU, K DMS 5 U, AK DMS/3U
This double M/S set includes the microphones, windscreen and cables needed for double-M/S recording. It is designed for digital recording of the three unprocessed microphone signals, with subsequent post-processing to be performed through the use of our Double M/S plug-in. |
Call for pricing |
Call for pricing
|
Schoeps GA 1 Adapter for Guitar for CCM/KC
The GA 1 clamps onto the sound hole of a guitar and is tightened by turning a coin in the outward-facing slot. With this mounting device the microphone or capsule is positioned within the instrument, where the maximum sound level can be obtained without risk of feedback. |
Call for pricing |
Call for pricing
|
Schoeps K 20 STR Support clamp for microphone amplifiers
With this clamp a CMC microphone amplifier can be mounted onto an STR vertical support rod or any other rod 12 mm in diameter. |
Call for pricing |
Call for pricing
|
Schoeps K 5 ISK Adapter cable for CMBI, Binder to Mini Stereo Jack
The 16.4' (5.0m) K 5 ISK Adapter Cable for CMBI Battery-Powered Microphone Amplifier from Schoeps carries the mono signal on the tip as well as on the ring. This enables the signal to be connected to both channels of a stereo jack socket when a single microphone is in use. |
Call for pricing |
1 651 Ft (1 300 Ft excl VAT)
|
Schoeps K EMC - extra charge per m HQ Microphone Cable, Mono
Schoeps K EMC - extra charge per m HQ Microphone Cable, Mono |
1 651 Ft (1 300 Ft excl VAT) |
35 090 Ft (27 630 Ft excl VAT)
|
Schoeps K EMC 10 U HQ Microphone Cable with EMC connectors, Mono, 10m
This single-channel microphone cable features a special RF-resistant Neutrik connectors at both ends. This connector uses a circular array of miniature capacitors to connect pin 1 to the connector housings, thus offering substantial protection from radio-frequency interference while also preventing ground loops. |
35 090 Ft (27 630 Ft excl VAT) |
51 600 Ft (40 630 Ft excl VAT)
|
Schoeps K EMC 20 U HQ Microphone Cable with EMC connectors, Mono, 20m
This single-channel microphone cable features a special RF-resistant Neutrik connectors at both ends. This connector uses a circular array of miniature capacitors to connect pin 1 to the connector housings, thus offering substantial protection from radio-frequency interference while also preventing ground loops. |
51 600 Ft (40 630 Ft excl VAT) |
Call for pricing
|
Schoeps KCY 250/0 I Active Y-Cable, 2*C to Binder, incl. SGC
By using the Active Stereo Cable KCY, a complete stereo recording setup can be arranged with only two small capsules and a small, elegant supporting device being visible. |
Call for pricing |
Call for pricing
|
Schoeps KCY 250/5 I Active Y-Cable, 2*C to Binder, 5m, incl. SGC
By using the Active Stereo Cable KCY, a complete stereo recording setup can be arranged with only two small capsules and a small, elegant supporting device being visible. |
Call for pricing |
Call for pricing
|
Schoeps KIY 250/0 I Y-Cable, 2*Binder to Binder
For stereo recording, the 16" Y-Cable from Schoeps connects two CMBI Battery-Powered Microphone Amplifiers to a compact junction box by means of two pieces of a cable, each 9.8” (250mm) in length. |
Call for pricing |
Call for pricing
|
Schoeps KLY 250/0 I Y-Cable, 2*Lemo to Binder
This cable allows two CCM-L compact microphones to be connected to a single two-channel output cable. |
Call for pricing |
Call for pricing
|
Schoeps KLY 250/0 SU Y-Cable, 2*Lemo to XLR3m
This cable allows two CCM-L compact microphones to be connected to a single two-channel output cable. |
Call for pricing |
Call for pricing
|
Schoeps KLY 250/5 I Y-Cable, 2*Lemo to Binder, 5m
This cable allows two CCM-L compact microphones to be connected to a single two-channel output cable. |
Call for pricing |
Call for pricing
|
Schoeps KLY 250/5 SU Y-Cable, 2*Lemo to XLR3m
This cable allows two CCM-L compact microphones to be connected to a single two-channel output cable. |
Call for pricing |
Call for pricing
|
Schoeps KMSC Piggyback Clamp 8mm for M/S
The KMSC is used for adapting a microphone of any directionality (including shotgun microphones) to M/S stereo, by the use of a CCM 8 (figure-8). |
Call for pricing |
Call for pricing
|
Schoeps KS 10 I Stereo Cable Binder, 10m
This high-quality extension cable with miniature Binder connectors can be used together with stereo arrangements that use KCY -/- I Y cables. |
Call for pricing |
Call for pricing
|
Schoeps KS 5 I Stereo Cable Binder, 5m
This high-quality extension cable with miniature Binder connectors can be used together with stereo arrangements that use KCY -/- I Y cables. |
Call for pricing |
Call for pricing
|
Schoeps KS 5 IU Stereo adapter cable from Binder to XLR-5M, 5m
This stereo adapter cable has a five-pin miniature Binder plug on one end and an XLR-5M plug on the other. The Binder plug fits the Y-cables for the CCM_L compact microphones (e.g. KLY 250/0 SU), such as would be used with the AMS LI elastic suspension for M/S or the WSR MS LI version with windscreen. |
Call for pricing |