1 192 530 Ft (939 000 Ft excl VAT)
|
CUX-100K
Super Wide Range Microphone (20Hz to 100kHz)
An omni/cardioid pattern super wide range condenser microphone with unprecedented 20Hz to 100kHz frequency response. |
1 192 530 Ft (939 000 Ft excl VAT) |
Call for pricing
|
Doughnut rubber ring set
Spare rubber ring set (F, R, screw) for CMS-10 suspension, for maintenance, (a part of suspension cylinder set) |
Call for pricing |
Call for pricing
|
FM-BE Front mesh part for COS-11D series (10pcs) - Beige
The 10-pack, beige FM-11 Mesh Cover from Sanken is designed for use with COS-11 Omnidirectional Miniature Electret Lavalier Microphones. |
Call for pricing |
Call for pricing
|
FM-BK Front mesh part for COS-11D series (10pcs) - Black
The 10-pack, black FM-11 Mesh Cover from Sanken is designed for use with COS-11 Omnidirectional Miniature Electret Lavalier Microphones. |
Call for pricing |
Call for pricing
|
FM-GY Front mesh part for COS-11D series (10pcs) - Gray
The 10-pack, gray FM-11 Mesh Cover from Sanken is designed for use with COS-11 Omnidirectional Miniature Electret Lavalier Microphones. |
Call for pricing |
Call for pricing
|
FM-WH Front mesh part for COS-11D series (10pcs) - White
The 10-pack, white FM-11 Mesh Cover from Sanken is designed for use with COS-11 Omnidirectional Miniature Electret Lavalier Microphones. |
Call for pricing |
Call for pricing
|
FW-11 Foam Windscreen (11 colors in 1 pack)
The FW-11 Foam Windscreen for Sanken COS-11s Series Lavalier Microphones - 11-Pack (Color Mix) reduces speaking and environmental noise for the Sanken COS-11s series lavalier microphones. |
Call for pricing |
Call for pricing
|
FW-11 HWM-BE Foam Windscreen (5 pieces) - Beige
Foam Windscreen for COS-11D HWM, beige color, 5 pieces in 1 pack. |
Call for pricing |
Call for pricing
|
FW-11 HWM-CC Foam Windscreen (5 pieces) - Cocoa color
Foam Windscreen for COS-11D HWM, cocoa color, 5 pieces in 1 pack. |
Call for pricing |
Call for pricing
|
FW-11-BK Foam Windscreen (black only 11 pcs in 1 pack)
The FW-11 Foam Windscreen for the Sanken Cos-11 uses a foam material to greatly minimize noise due to inherent wind and other sources. The FW-11 will work for the Cos-11 and Cos-22 microphones. |
Call for pricing |
Call for pricing
|
FW-11-DGY Foam Windscreen (dark gray only 11 pcs in 1 pack)
The FW-11 Foam Windscreen for the Sanken Cos-11 uses a foam material to greatly minimize noise due to inherent wind and other sources. The FW-11 will work for the Cos-11 and Cos-22 microphones. |
Call for pricing |
Call for pricing
|
GS-1
Suspension Hand grip SH-1+HG-1 |
Call for pricing |
Call for pricing
|
GS-100
Suspension holder |
Call for pricing |
Call for pricing
|
GS-180A
Suspension holder for one CUW-180 |
Call for pricing |
Call for pricing
|
GS-180W
Suspension holder for two CUW-180 |
Call for pricing |
Call for pricing
|
GS-180WS
Surround set including cage, suspension, jammer for two CUW-180 |
Call for pricing |
Call for pricing
|
GS-180XY
CUW-180 one XY set, cage, jammer, suspension |
Call for pricing |
Call for pricing
|
GS-23
The Sanken GS-23 Microphone Handgrip & Shockmount is specifically designed for the Sanken CS-2 microphone. The GS-23 mount features a shockmount, ergonomic handgrip and may also be mounted onto a boompole. |
Call for pricing |
Call for pricing
|
GS-5E
Suspension handgrip |
Call for pricing |
Call for pricing
|
H-21F Microphone Holder
Microphone Holder for Sanken Cardioid Condenser Microphone CU-31 or CU-32. |
Call for pricing |
Call for pricing
|
HC-11 Holder Clip (10 pcs) - Beige
Sanken HC-11 Horizontal Clip is designed specifically for use with the COS-11 miniature lavalier microphone. |
Call for pricing |
Call for pricing
|
HC-11 Holder Clip (10 pcs) - Black
Sanken HC-11 Horizontal Clip is designed specifically for use with the COS-11 miniature lavalier microphone. |
Call for pricing |
Call for pricing
|
HC-11 Holder Clip (10 pcs) - Gray
Sanken HC-11 Horizontal Clip is designed specifically for use with the COS-11 miniature lavalier microphone. |
Call for pricing |
Call for pricing
|
HC-11 Holder Clip (10 pcs) - White
Sanken HC-11 Horizontal Clip is designed specifically for use with the COS-11 miniature lavalier microphone. |
Call for pricing |
Call for pricing
|
HC-11V Vertical Holder Clip (10 pcs) - Beige
Sanken HC-11V Vertical Clip is designed specifically for use with the COS-11 miniature lavalier microphone. |
Call for pricing |
Call for pricing
|
HC-11V Vertical Holder Clip (10 pcs) - Black
Sanken HC-11V Vertical Clip is designed specifically for use with the COS-11 miniature lavalier microphone. |
Call for pricing |
Call for pricing
|
HC-11V Vertical Holder Clip (10 pcs) - Gray
Sanken HC-11V Vertical Clip is designed specifically for use with the COS-11 miniature lavalier microphone. |
Call for pricing |
Call for pricing
|
HC-11V Vertical Holder Clip (10 pcs) - White
Sanken HC-11V Vertical Clip is designed specifically for use with the COS-11 miniature lavalier microphone. |
Call for pricing |
Call for pricing
|
HC-11W - Holder Clip Double for 2 COS-11 D (10 pcs) - Beige
The Sanken Double Clip for COS-11 Microphone. This model accommodates up to 2 microphones. |
Call for pricing |
Call for pricing
|
HC-11W - Holder Clip Double for 2 COS-11 D (10 pcs) - Black
The Sanken Double Clip for COS-11 Microphone. This model accommodates up to 2 microphones. |
Call for pricing |
Call for pricing
|
HC-11W - Holder Clip Double for 2 COS-11 D (10 pcs) - Gray
The Sanken Double Clip for COS-11 Microphone. This model accommodates up to 2 microphones. |
Call for pricing |
Call for pricing
|
HC-11W - Holder Clip Double for 2 COS-11 D (10 pcs) - White
The Sanken Double Clip for COS-11 Microphone. This model accommodates up to 2 microphones. |
Call for pricing |
Call for pricing
|
HC-22
The Sanken Holder Clip for COS-22 Microphone HC-22 is a clip designed specifically for use with the HC-22 microphone. Use this practical microphone clip to perfectly position your microphone for optimum recording results. |
Call for pricing |
Call for pricing
|
HCH-180
Holder for center microphone (CS-1) (2qty) |
Call for pricing |
Call for pricing
|
HG-1
Handgrip part only |
Call for pricing |
Call for pricing
|
K-BWC Camera mount for SH-1
Camera mount for SH-1, for Ø 26mm mic holder |
Call for pricing |
Call for pricing
|
K-BWJ
Camera mount for SH-1, for Ø 21mm mic holder |
Call for pricing |
Call for pricing
|
K-BWS
Camera mount for SH-1, for Ø 24mm mic holder |
Call for pricing |
Call for pricing
|
MB-2D (NE)
Matrix converter from M-S to L-R, angle adjustable |
Call for pricing |
Call for pricing
|
P-01-PT
48V phantom I/F, XLR-3M output |
Call for pricing |
Call for pricing
|
P-11BPC for RAMSA
COS-11DBP I/F part with Hirose 4Pin connector for RAMSA. |
Call for pricing |
Call for pricing
|
P-11BPC for SONY
COS-11DBP I/F part with Hirose 4Pin connector for SONY. |
Call for pricing |
Call for pricing
|
P-11DBP-PT
Sanken P-11DBP-PT - AA battery & P48V I/F part only of COS-11DBP/with 5cm cable stripped end. |
Call for pricing |
Call for pricing
|
P-11DPT
The Sanken P-11X-PT Phantom Power Supply is intended to power the COS-11DPT microphones with external phantom power. The power supply features an unterminated pigtail for wiring the microphone to the input, an XLR output and a belt-clip. |
Call for pricing |
Call for pricing
|
P-11RC for RAMSA
COS-11D I/F part with Hirose 4Pin connector. |
Call for pricing |
Call for pricing
|
P-11RC for SONY
COS-11D I/F part with Hirose 4Pin connector. |
Call for pricing |
Call for pricing
|
PIN-11 Holder with Safety Pin (10pcs)
The Sanken Microphone Clip with Safety Pin for COS-11S Microphone PIN-11 is a clip designed specifically for use with the HC-11S miniature lavalier microphone. |
Call for pricing |
Call for pricing
|
Plastic case for COS-11DPT and COS-11DR
Plastic case for COS-11DPT and COS-11DR |
Call for pricing |
Call for pricing
|
RB-01
The Sanken RB-01 Rubber Base is an accessory for the CUB-01 miniature boundary microphone. The RB-01 provides adequate isolation from structure born vibration and noise. The double-sided adhesive secures the CUB-01 microphone and the rubber base to the desktop surface. |
Call for pricing |
Call for pricing
|
RB-100
Spare rubber parts, 2 in 1 Set for GS-100. |
Call for pricing |
2 946 Ft (2 320 Ft excl VAT)
|
RM-11 Rubber Mount - Beige
Sanken RM-11 Rubber Microphone Mount is a rubber mount designed specifically for use with the COS-11D miniature lavalier microphone. |
2 946 Ft (2 320 Ft excl VAT) |
2 946 Ft (2 320 Ft excl VAT)
|
RM-11-BK Rubber Mount - Black
Sanken RM-11-BK Rubber Microphone Mount is a rubber mount designed specifically for use with the COS-11D miniature lavalier microphone. |
2 946 Ft (2 320 Ft excl VAT) |
Call for pricing
|
RM-11C-BK Rubber Mount with holder clip (10pcs) - Black
Rubber Mount with holder clip (10pcs) - Black |
Call for pricing |
Call for pricing
|
Rubber String set for S-41
Spare rubber string for S-41, two in one set. |
Call for pricing |
Call for pricing
|
Rubber String set for S-44X
Spare rubber string for S-44X, two in one set. |
Call for pricing |
Call for pricing
|
S-41
Elastic suspension shock mount for the Sanken CU-41. |
Call for pricing |
Call for pricing
|
S-44XII
Elastic suspension |
Call for pricing |
Call for pricing
|
S-55
Suspension holder |
Call for pricing |
Call for pricing
|
SC-532/0.3
This Sanken SC-532 5-Pin to 2 3-Pin XLR Male Adapter Y-Cable is an adapter Y-cable with a 5-pin XLR female plug at one end and two 3-pin XLR male plugs at the other end. It is used to split two-channel signals into two mono channels, when using for example a power supply. |
Call for pricing |
Call for pricing
|
SC-532/1.8
XLR-5F to two XLR-3M "Y" cable 1.8m |
Call for pricing |