Programmed USB cable (3').

Serial cable to connect the Mix-8 to Nomad.

3.5mm to 3.5mm tape output to computer or tablet (5').

3.5mm to TA5 Nomad return input (5').

Nomad Touch expands the functionality and features of your Nomad 12 with a touch screen interface designed for use in the sound bag. New ZaxHub integration allows you to use your Nomad Touch along with your FP-8 or Mix-8 and RX-12. Requires Nomad 12 Serial # to generate unlock code. Includes 1 x Serial data cable and 1 x Tablet to Nomad audio cable. Does not include Windwos tablet, only compatible with Nomad 12.

Nova - egy komlpett hangfelvevő megoldás, amely magába foglalja a keverőt, felvevőt, ZaxNet™ távvezérlést és a vezetéknélküli vevőket egyetlen kompakt és könnyű eszközbe. A népszerű Nomad és Deva 24 tulajdonságait kombinálva két beépített vezetéknélkűli vevővel, a Nova egy új sztenderdet állít fel a játékfilm-, TV közvetítés-, élő előadások- és a nagyfelbontású hangeffektek felvétele terén.

-NP-50 Li-Ion, 3.7V, 1000mAh, rechargeable battery
-for use with ZMT transmitter and ZFR400 recorder

The Oasis is a full featured mixing panel with 8 motorized, touch sensitive faders on 3 active banks for up to 40 assignable fader channels. In addition you’ve got hardware trim controls, transport control, dedicated PFL keys, routing control and more. Includes 1 x Nomad to Oasis USB cable, 1 x Oasis to computer USB cable and 1 x Nomad to computer audio cable. Does not include computer or tablet, only compatible with Nomad 12.

Used to monitor audio being recorded / played back or
received from the IFB100/200. It has standard 3.5mm jack.

Built-in IFB transmitter / receiver for audio, timecode and remote
control commands. Adds a mono headphone output jack to the QRX. Includes bendable IFB antenna.

The QRX200 is a 200 MHz wide ENG receiver. A tunable tracking front end filter is featured in the QRX200 so you can receive any frequency in any block from 20 through 27 or 512 – 698 MHz while still filtering out unwanted RF.

The QRX212 is a dual channel wideband receiver module for use with the Zaxcom RX-12 Digital Wireless Receiver. The modules can be easily added or swapped as necessary.

QRX235 receives up to 4 channels of 100% digital audio from up to 2 transmitters, any combination of mono and stereo transmitters is accepted. The audio output can be either analog or AES. It also features our patented side mounted LED’s, these provide visual confirmation of audio and RF reception.

The QRX300 is a special order receiver dedicated to receive a single channel of ZHD48 modulation. The receiver has very narrow filters that allow for a 50 KHz wide signal to be received with a channel spacing as close as 100 KHz.

Slot-in receiver for RX-12. Dedicated ZHD receiver, receives from ONLY ONE ZHD transmitter, spacing @ 100 KHz.

The QRX335 is an ENG receiver designed to pair with a single Zaxcom High Density transmitter in a matching block for channel-spacing as close as 100 KHz.

RX-12 is a one stop receiver solution for your bag or cart. It contains a 35 MHz tracking front end filter to eliminate interference from unwanted stray RF, an RF amplifier and antenna and power distribution for up to six QRX212 dual receiver modules for the reception of twelve separate TRX transmitters.

The RX-12R is a completely reimagined rack mountable receiver ideal for sound challenges in studio and network applications. Its ergonomic design takes up only one-and-a-half rack spaces in height.

The RX-4 is an interface to convert Zaxcom’s MRX214 and MRX414 receiver modules into stand-alone receivers.