These support rods have complementary 3/8" threads on each end and can thus be screwed together in any combination to extend one another.

These support rods have complementary 3/8" threads on each end and can thus be screwed together in any combination to extend one another.

These support rods have complementary 3/8" threads on each end and can thus be screwed together in any combination to extend one another.

These support rods have complementary 3/8" threads on each end and can thus be screwed together in any combination to extend one another.

These support rods have complementary 3/8" threads on each end and can thus be screwed together in any combination to extend one another.

The STR-TC is a component of the TC miniature table stand.

The STV 900 / 1400 L3Ug is an elegant, unobtrusive stand for microphones of the CCM-L compact microphone series.

Mounting adapter for CMC 1 KV

The SCHOEPS SuperCMIT 2 U defines a new category of shotgun microphone, with directivity that goes beyond anything previously known. It offers the recording engineer entirely new possibilities.

The SCHOEPS SuperCMIT 2 U defines a new category of shotgun microphone, with directivity that goes beyond anything previously known. It offers the recording engineer entirely new possibilities.

Schoeps Surcharge ”linear” version of the CMC for microphone amplifier without Low Cut for infrasound recording

Schoeps Surcharge for custom color e.g. for MK, CCM, CMC, CMIT, V4

Schoeps Surcharge for custom engraving e.g. for MK, CCM, CMC, CMIT, V4

Schoeps Surcharge for custom length valid for all STR, RC, RL, RS, S

Schoeps Surcharge for custom logo engraving: one-time set-up costs for logos only, not required for plain text

A SCHOEPS legkeresettebb, "Colette"-sorozatú mikrofonjainak párjait kínálja összeállításokban. Mindegyik fadoboz két komplett mikrofont tartalmaz összeválogatott kapszulákkal, SG 20 stand adapterekkel, B 5 D szélvédőkkel és a legtöbb esetben CMC 6 analóg mikrofon erősítőkkel.

Elegant stand for extension tubes up to 700 mm.

This table microphone consists of two CCM 4 com­pact microphones (cardioids) rigidly attached to one another and facing in the same direction. They can be tilted forward or backward together.

Schoeps TC 2 Double miniature table stand for KC/CCM

These elegant table stands, with vibration-isolating base, can be placed unobtrusively. The vertical rod is removable, allowing the microphone to be mounted on the base close to the mounting surface.

This convenient elastic suspension device accepts any microphone or accessory (such as a gooseneck) with a 20 mm diameter. A clamping arrangement holds the item in place.

This elegant microphone desk stand is easily adjusted in height and angle, thus offering an esthetically pleasing alternative to goosenecks, which are often twisted into awkward shapes.

The required K 5 LU adapter cable (Lemo to XLR-3M) is included with the CCM _L.

Schoeps TSR 200 L Table stand with gooseneck element, for CCM, Lemo

The base of the USM-V4 has a 3/8" internal thread. A threaded adapter is supplied for 5/8" mounting.

A V4 U a SCHOEPS stúdió vokál-mikrofonja, mely egyesíti a SCHOEPS-re jellemző kimagasló technikai tulajdonságokat egy időtálló, klasszikus dizájnnal.

The V4 U is the studio vocal microphone by SCHOEPS.
It unites the outstanding technical characteristics typical of SCHOEPS with a timeless, classic design.

The V4 SGV Set contains the microphone, a wooden case and the SGV stand clamp. The base of the SGV has a 5/8"-27 NS internal thread. A threaded adapter is supplied for 3/8" and 1/2" mounting. The angle can be varied continuously in the vertical plane.

The base of the SGV has a 5/8"-27 NS internal thread. A threaded adapter is supplied for 3/8" and 1/2" mounting.

The usage of the “V4 USM Set” is recommended for maximum solid-borne sound isolation.

The usage of the “V4 USM Set” is recommended for maximum solid-borne sound isolation.

This instrument adapter is attached to the bridge rather than the body of the instrument.

This windscreen is an accessory part for the CMIT 5/MiniCMIT shotguns microphone.

This windscreen is an accessory part for the CMIT 5/MiniCMIT shotguns microphone.

This windscreen is an accessory part for the CMIT 5/MiniCMIT shotguns microphone.

This windscreen is an accessory part for the SuperCMIT 2 U shotgun microphone.

This windscreen is an accessory part for the SuperCMIT 2 U shotgun microphone.

Basket windscreen with nylon fabric, made of two separable halves. It is rain-resistant and less unusual-looking than a fur-like windscreen.

Comprises a basket (W 20 R) and a fur-like overcoat (R1). It is ca. 13 dB more effective than the W 20, with no greater impairment of the sound quality.

The foam encloses an air chamber around the capsule, similar to a basket windscreen. It is highly effective, yet it has only a slight influence on the sound.

Acoustic foam windscreen, especially for use with omnidirectional microphones in wind.

Schoeps WKC 5 Active cable for Colette, angled version, 5m

This winds­creen has a gray po­rous vel­vet-li­ke sur­fa­ce tre­at­ment. It is de­si­gned so that con­ven­tio­nal M/S set­ups (AMS 22, UMS 20) as well as most mi­ni­a­ture mi­cro­pho­ne ar­ran­gements for M/S (RCY, SGMSC, HSGMSC) and also the X/Y microphone CMXY can be pro­tec­ted from mild wind.

The “ORTF Surround” recording method is a new system for the pickup of surround ambience.

Basket-Type Windscreen for ORTF Surround with fur and suspension with integrated heating. This windscreen is part of the ORTF Surround Outdoor Set.

The “ORTF Surround” recording method is a new system for the pickup of surround ambience.

The ORTF-3D was developed aiming at optimal imaging characteristics, similar to those of the 'ORTF Stereo' and 'ORTF Surround' setups. It features very good 360° imaging with a pleasant, natural-sounding spatial impression and a large listening area.

This windscreen is designed exclusively for the CMIT 5 shotgun microphones. It consists of an outer "basket (Rycote-Size "Kit 3")," an elastic suspension and a "Connbox" with a very thin, pliable cable so that the suspension will be fully effective in isolating the microphone from solid-borne noise.

”Double M/S” is an improved version of the well-known M/S stereo recording technique. In addition to a front-facing ”mid” microphone (here this is a shotgun microphone) and a figure-8 ”side” microphone, a rear-facing directional microphone is set up.

”Double M/S” is an improved version of the well-known M/S stereo recording technique. In addition to a front-facing cardioid or supercardioid ”mid” microphone and a figure-8 ”side” microphone, a rear-facing directional microphone is set up.

The WSR MS consists of an elastic suspension (AMS_) and a basket-type windscreen with Windjammer. It is intended for one or two small microphones. It allows mono as well as M/S stereo recordings.

The WSR MS CMIT LU can be equipped with a CMIT 5 as mid channel and a CCM 8 Lg as side channel for M/S stereo recordings.

The WSR ORTF LU consists of the STC 4 mounting adapter for ORTF (for two CCM 4 L cardioids), an elastic suspension, a Y-cable with Connbox and a basket-type windscreen including Windjammer.

This windscreen is designed for the Super-CMIT 2 U digital shotgun microphones. It consists of an outer "basket, an elastic suspension and a "Connbox" with a very thin, pliable cable.

The Z 10 allows microphones or accessory parts to be mounted onto the edge of a table or the like.