132018
Miniature Microphone Amplifier, permanently attached laterally outgoing cable, incl. premium case
and magnetic accesories, Set including CMC 1 KV (2 m cable, XLR3M), Premium case for
CCM, Magnetic Pad 5 cm black, Magnetic angle piece 30°, Magnetic angle piece 45°, Disc magnet
20 mm, SG 20, Suction cup Ø 50 mm with magnet

The CMC 1 L is our new, small Colette microphone amplifier, about one-third the length and 53% lighter than the CMC 6. It is compatible with all components of the Colette system and can be used in place of the CMC 6 without compromise, for all applications in which the size and weight of the microphone play a role.

Set contains: COSI-CMC1U, MK 41, CMC 1 U, SG 20, Premium case for CMC/MiniCMIT

Schoeps CMC 1 SO for A10
The CMC 1 SO is identical to the CMC 1 U, but instead of a built-in XLR connector, it has a permanently attached gooseneck and a Lemo-3pin output connector.

Schoeps CMC 1 SO for Zaxcom
The CMC 1 SO is identical to the CMC 1 U, but instead of a built-in XLR connector, it has a permanently attached gooseneck and a Lemo-3pin output connector.

The CMC 1 is a new, small Colette microphone amplifier, about one-third the size and 40% lighter than the CMC 6. It is compatible with all components of the Colette system and can be used in place of the CMC 6 without compromise, for all applications in which the size and weight of the microphone play a role.

Although the CMC 5 Vintage U has a more modern successor (the CMC 6 U), some people place a special value on its discrete circuitry, or require an exact match for an existing microphone amplifier of this same type. The CMC 5 Vintage U is designed exclusively for 48-Volt phantom powering.

The CMC 6 U is designed for standard 48- and 12-Volt phantom powering. Its circuitry recognizes the supply voltage and adjusts itself automatically.

Schoeps CMC 6xt U Microphone Amplifier, 40kHz, incl. SG 20

Digital microphone amplifier for the Colette series, compatible with all MK capsules and Colette accessories
AES42 interface, Modes 1 and 2
Recommended for film sound and sound design

The SCHOEPS CMH is a wired handheld or soloist's microphone with particular immunity to plosive noise ("popping"). Because of its well-balanced frequency response it can also be used for speech pickup.

The SCHOEPS CMH is a wired handheld or soloist's microphone with particular immunity to plosive noise ("popping"). Because of its well-balanced frequency response it can also be used for speech pickup.

The CMIT 5 is SCHOEPS' shotgun microphone which has set a new standard for shotgun microphones since its release. The CMIT 5's directionality increases smoothly with higher frequencies, which results in a very balanced sonic character.

A CMIT 5 a SCHOEPS "kispuska" mikrofonja, mely megjelenésével egy új sztenderdet teremtett a "kispuska" mikrofonok közt. A CMIT 5 irányítottsága finoman növekszik a nagyobb frekvenciákon, mely egy nagyon kiegyensúlyozott akusztikus karaktert eredményez.

The set consists of:
- "Shotgun" microphone CMIT 5 U
- CCM 8 Lg (figure-8 for the side channel)
- WSR MS CMIT LU basket-type windscreen (Rycote Size "AF") including cabling, Windjammer and Connbox, double clamp
- breakout cable AK SU/2U

The CMIT Mono Set consists of the following items:
- CMIT 5 U shotgun microphone,
- elastic suspension with pistol grip and cabling with Connbox,
- WSR 3 CMIT basket-type windscreen (100 mm dia., length 360 mm) incl. WJ CMIT Windjammer

The CMR allows any SCHOEPS ”Colette” series capsule (except the BLM 03 C active boundary layer capsule) to be used with pocket transmitters.

Schoeps CMR: flat charge for output connector including installation

CMXY 4V Ig: miniature output connector; the KS 5 IU adapter cable to XLR-5M is included.

CMXY 4V Ug: XLR-5M output plug; The adapter cable AK SU/2U (XLR-5F to 2 × XLR-3M) is included.