Insight 2
With Insight 2, you can monitor changes made during mixing and mastering, troubleshoot problematic mixes, ensure the intelligibility of your dialogue, and achieve compliance with broadcast loudness standards.

Built-in receiver allows for audio to be received from the
IFB100/200.

The 120 pieces of Invisible Lavalier Microphone Tape Mounts from Bubblebee Industries consist of a transparent double-sided tape that allows you to easily mount and hide your lavalier microphone directly on the skin or on clothes.

19-34mm átmérőjű mikrofonokkal való használatra alkalmas. Ideális front-heavy vagy Softie/Baby Ballgag szélvédővel használt mikrofonokhoz.

The Rycote INV-1 InVision Microphone Suspension addresses the demand for a professional, Rycote-quality shockmount in the studio, conference settings and speech capturing applications.

The Rycote INV-2 InVision Microphone Suspension addresses the demand for a professional, Rycote-quality shockmount in the studio, conference settings and speech capturing applications.

INV-3 is suitable for microphones including the AKG C430, Behringer C2, DPA 4021 and Sennheiser MKH8000 series with MZX8000.

The INV-4 is suitable for compact microphones such as the Schoeps CCM series and miniature shotgun mics such as the AKG C747. The 9.5mm Lyre clips feature a reducing sleeve which grips the connector and the cable, leaving the body of the microphone free to be completely covered by a foam.

The INV-5 is suitable for compact microphones such as the Schoeps CCM series when used without a large foam windshield. The single 62 (19/25) Lyre at the front holds a mic body diameter of 19-25mm and the rear single 62 (9.5) Lyre holds connectors of 8-11mm e.g. lemo.

Az INV-6 rövid, 19-25mm átmérőjű, kismembrános kondenzátor mikrofonokhoz alkalmazható, mint pl. a Sennheiser MKH 8020/40/50, MZX XLR moduljukkal használva. A mikrofontartó egy pár Single 72-es (19/25) Lírát is tartalmaz.

The INV-6 Heavy is a heavier grade version of the INV-6 which feature firmer Single 82 (19/25) Lyres which will support microphones used with lightweight windshields in 'run and gun' scenarios.

Mikrofontartó kismembrános kondenzátor mikrofonokhoz, mint pl. a Schoeps CMC-sorozat és "kispuska" mikrofonokhoz, mint a Sennheiser MKH416, beltéri, szivaccsal történő használatra.

INV-8 is suitable for microphones including the Neumann RSM190 and RSM191, Pearl MS8 and MSH10, and Sony ECM 999, ECM 979, and ECM 959.

INV-9 is suitable for microphones of up to 30mm in diameter, such as the Shure SM57 and SM58, and Neumann's KMS105.

INV-BH is suitable for microphones from 19 to 34mm in diameter, up to 500 grams in weight and 50 cm length maximum, with use of the 3/8" female Boom Adaptor.

The INV-Lite 19 Boom Shockmount from Rycote is a discreet, low-profile shockmount which isolates short shotgun microphones (19mm in diameter) from shock and handling noises, when they are used mounted on a boompole.

The INV-Lite 19 Boom Shockmount from Rycote is a discreet, low-profile shockmount which isolates short shotgun microphones (19mm in diameter) from shock and handling noises, when they are used mounted on a boompole.

Rycote have developed a little upgrade for the INV-Lite mount itself, whcih provides enhanced protection from the effects of air-flow over the shock mount, when fast booming.

InVision Stereo Pair Kit is suitable for shotgun microphones from 19-25 mm in diameter

The InVision Table Stand allows a microphone or recorder to be mounted on a flat surface, leaving both hands of the recordist free, and may be used in broadcast studios or for location recording where a desk or other flat surface is available.