The QRX200 is a 200 MHz wide ENG receiver. A tunable tracking front end filter is featured in the QRX200 so you can receive any frequency in any block from 20 through 27 or 512 – 698 MHz while still filtering out unwanted RF.

The QRX212 is a dual channel wideband receiver module for use with the Zaxcom RX-12 Digital Wireless Receiver. The modules can be easily added or swapped as necessary.

QRX235 receives up to 4 channels of 100% digital audio from up to 2 transmitters, any combination of mono and stereo transmitters is accepted. The audio output can be either analog or AES. It also features our patented side mounted LED’s, these provide visual confirmation of audio and RF reception.

The QRX300 is a special order receiver dedicated to receive a single channel of ZHD48 modulation. The receiver has very narrow filters that allow for a 50 KHz wide signal to be received with a channel spacing as close as 100 KHz.

Slot-in receiver for RX-12. Dedicated ZHD receiver, receives from ONLY ONE ZHD transmitter, spacing @ 100 KHz.

The QRX335 is an ENG receiver designed to pair with a single Zaxcom High Density transmitter in a matching block for channel-spacing as close as 100 KHz.

The QS Premium Boom Pole from Ambient Recording is handmade layer by layer out of pre-preg carbon fiber with four segments designed to be stiff, yet lightweight and well balanced at the same time.

The QS-SCM Premium Boom Pole from Ambient Recording is handmade layer by layer out of pre-preg carbon fiber with four segments designed to be stiff, yet lightweight and well balanced at the same time.

The QS-SCS Premium Boom Pole from Ambient Recording is handmade layer by layer out of pre-preg carbon fiber with four segments designed to be stiff, yet lightweight and well balanced at the same time.

The QSM Mini Premium Boom Pole from Ambient Recording is handmade layer by layer out of pre-preg carbon fiber with four segments designed to be stiff, yet lightweight and well balanced at the same time.

The QSM-SCM Mini Premium Boom Pole from Ambient Recording is handmade layer by layer out of pre-preg carbon fiber with four segments designed to be stiff, yet lightweight and well balanced at the same time.

The QSM-SCS Mini Premium Boom Pole from Ambient Recording is handmade layer by layer out of pre-preg carbon fiber with four segments designed to be stiff, yet lightweight and well balanced at the same time.

Que Audio DSLR Mini Windjammer

The Twister (QUM) is a knuckle joint with two axes of rotation allowing the mic assembly to be adjusted horizontally independent of the booming angle. This is essential with the use of stereo or surround microphones to maintain a correct perspective reproduction.

The Ambient Recordings QWB Quickpole Wireless Boom Mount is an aluminum mount designed to accomodate wireless microphone receivers and power supplies such as the UMP II. The QWB allows these accessories to be mounted on the top of Quick Pole boompoles.

The Ambient Recording QWB-RE Rain Cover is designed for QWB Quickpole Wireless Boom and UMP/TX Universal Mic Power Supply.

The QXCCM-100 from Ambient Recording is a cable kit featuring a coiled cable and two 3-pin mono XLR connectors for the QX 5100 quickpole light boom pole.

The QXCCM-50 from Ambient Recording is a cable kit featuring a coiled cable and two 3-pin mono XLR connectors for the QX 550 quickpole light boom pole. The cable goes through a side outlet in the pole.

The QXCCM-65 from Ambient Recording is a cable kit featuring a coiled cable and two 3-pin mono XLR connectors for the QX 565 quickpole light boom pole. The cable goes through a side outlet in the pole.

The QXCCM-80 from Ambient Recording is a cable kit featuring a coiled cable and two 3-pin mono XLR connectors for the QX 580 quickpole light boom pole.