L-Mount Battery Sled. Holds one L-Mount battery (not included). Powers MixPre Original Series, MixPre-M
Series, and MixPre II Series recorders. Compatible with a single XL-B2, XL-B3 or other Sony L-type battery.

Battery sled for MixPre recorders. Holds 2 hot-swappable, Li-Ion L-mount batteries.

AC wall mount power supply w/USB-C connector and adapter plugs for US, UK, Australia & Europe. Does not recharge batteries. For use with all MixPre recording models.

USB-C to 2x USB-A Y-cable for powering from a computer. For use w/ MixPre recorders. Not for use with 10T or 10M.

Solid metal base with adjustable height and angle. For use with MixPre Series Recorders & PIX-E monitors with or without the PIX-LR audio accessory attached. Mounts via 1/4" 20-thread mounting hole. Can also be used with any device with 1/4" 20 screw hole. “A” mounting holes for 'permanently' fixing PIX-Base to a table or other structure. Multiple bases can be linked together without tools using interlocking design.

2.5" SSD drive caddy for the 970 Audio Recorder/Player. FW 800 USB 3.0 and eSATAp connections for data transfer.

Compact Flash Caddy interface. Records audio .WAV files to approved removable CF Cards. For use with 970 only.

Rack-Mount kit for the 970. Accommodates (2) rack type recorders. Includes a blank panel for mounting a single unit. 2 RU height.

Shim for use with 7mm drives. Increases SSD thickness from 7 mm to 9 mm making it compatible with the 970. Includes shims for two drives.

240 GB capacity. 2.5" SSD approved for use with the PIX 220i, PIX 240i, PIX 250i, and PIX270i Video Recorders. Preformatted exFAT. No shim required for use with PIX-CADDY2.

32 GB, UDMA-7 CompactFlash (CF) card that provides data rates of up to 160 MB/s (read) and 120 MB/s
(write). The SAM-32CF II has been optimized and extensively tested to ensure fast and flawless performance
when used with the 6-Series, 970, and for WAV files on the PIX 260i and PIX 270i.

32GB approved SD/SDHC card for use with Sound Devices and Video Devices products. It is rated at 90 MB/s for read & write speeds (620x).

64GB SDXC card that provides data rates of up to 240 MB/s (read) and 100 MB/s (write). The SAM-64SD has
been optimized and extensively tested to ensure fast and flawless performance when used with the 8-Series,
6-Series and MixPre Series.

Charger for Sony compatible L Series batteries. Charges one battery. Includesg wall & car charger, Euro adapter. Input voltage 110v-240v.

Dual SuperSlot Wireless Module. Compatible with any 8 Series mixer-recorder. UniSlot and SuperSlot
wireless receivers are accepted. The SuperSlot protocol supports up to four channels of wireless audio per
slot. The SL-2 rear panel has two TA3 for an additional four inputs of AES3 audio and two 4-pin Hirose DC
Outputs.

Wireless integration accessory for the 688 and Scorpio. HoldS up to three dual unislot or SuperSlot™ compatible Recievers controedled via the 688 or Scorpio. Adds NP-1 powering option, two 12v isolated outputs & two non isolated outputs for external devices.Plus one USB Charging port. SL-Riser required to secure to Scorpio.

Aluminum chassis coupler used between SL-6 and Scorpio for increased airflow and secure connection, required for SL-6 with Scorpio.

Linear fader controller for 8-Series (833, 888, Scorpio). 16 P&G faders, 16 dedicated trims, additional rotary
controls for bus levels. Panoramic, stowable LCD for metering and display. 41 cm (16.5-inch) wide for cart
applications. Powered by 4-pin XLR 10-18 V DC supply (not included). Includes USB-A to USB-B cable and
¼” TRS to ¼” TRS cable. XL-WP4 Power Supply not included.

USB-C-CAP
Replacement rubber caps for USB-C socket, pack of five.

For connection to Wingman® IOS app. WM-Connect uses Bluetooth® Smart technology and comes with a right-angle USB A-to-B adapter and USB A-to-B cable adapter to connect to the 6-Series USB port or a CL-12's USB keyboard port.