Basket-Type Windscreen for ORTF Surround with fur and suspension with integrated heating. This windscreen is part of the ORTF Surround Outdoor Set.

The “ORTF Surround” recording method is a new system for the pickup of surround ambience.

The ORTF-3D was developed aiming at optimal imaging characteristics, similar to those of the 'ORTF Stereo' and 'ORTF Surround' setups. It features very good 360° imaging with a pleasant, natural-sounding spatial impression and a large listening area.

This windscreen is designed exclusively for the CMIT 5 shotgun microphones. It consists of an outer "basket (Rycote-Size "Kit 3")," an elastic suspension and a "Connbox" with a very thin, pliable cable so that the suspension will be fully effective in isolating the microphone from solid-borne noise.

”Double M/S” is an improved version of the well-known M/S stereo recording technique. In addition to a front-facing ”mid” microphone (here this is a shotgun microphone) and a figure-8 ”side” microphone, a rear-facing directional microphone is set up.

”Double M/S” is an improved version of the well-known M/S stereo recording technique. In addition to a front-facing cardioid or supercardioid ”mid” microphone and a figure-8 ”side” microphone, a rear-facing directional microphone is set up.

The WSR MS consists of an elastic suspension (AMS_) and a basket-type windscreen with Windjammer. It is intended for one or two small microphones. It allows mono as well as M/S stereo recordings.

The WSR MS CMIT LU can be equipped with a CMIT 5 as mid channel and a CCM 8 Lg as side channel for M/S stereo recordings.

The WSR MS consists of an elastic suspension (AMS_) and a basket-type windscreen with Windjammer. It is intended for one or two small microphones. It allows mono as well as M/S stereo recordings.

The WSR ORTF LU consists of the STC 4 mounting adapter for ORTF (for two CCM 4 L cardioids), an elastic suspension, a Y-cable with Connbox and a basket-type windscreen including Windjammer.

This windscreen is designed for the Super-CMIT 2 U digital shotgun microphones. It consists of an outer "basket, an elastic suspension and a "Connbox" with a very thin, pliable cable.

The Z 10 allows microphones or accessory parts to be mounted onto the edge of a table or the like.

Charger for Sony compatible L Series batteries. Charges one battery. Includesg wall & car charger, Euro adapter. Input voltage 110v-240v.

The Ambient Recording SD-UW Underwater Housing for Sound Recorder is made out of hard, anodized, seawater-resistant aluminum and thereafter coated with PTFE, coated which gives it high durability and stability.

Sennheiser HMD 25-1 Headset Mini Windjammer

Sennheiser HMD26 Mini Windjammer

The Mini Windjammer for the Sennheiser Memory Mic provides excellent wind isolation for capturing audio in high-wind environments. Made from high-quality synthetic fur specifically designed for wind isolation, easy-to-fit slip-on fur covers for use when recording outside.

The Mini Windjammer for the Sennheiser MKE 400 provides excellent wind isolation for capturing audio in high-wind environments.

Set Of 5 X 24.6 X 2.4 & 5 X 16.6 X 2.4 'O' Rings

Suspension holder