Soft elastic suspensions for CMC 1 U with the modern, elliptical isolators.

Elastic suspensions for MiniCMIT with the modern, elliptical isolators.

The MINIX CCM LU RF is a highly effective miniature elastic suspension for the microphones of the CCM series. Combined with a SCHOEPS supercardioid CCM 41 L and the special windscreen B 5 D, the MINIX is a small, extremely light and at the same time highly effective system for boom recordings.

The PIANI-3 CCM is for classic Double M/S with 2 * CCM 4 and a CCM 8 microphone, decodable with the SCHOEPS DMS plugin. When Dialog is recorded, a CCM 41 can also be used for the front M channel. The Pianissimo is a highly efficient windshield. Its special geometry leads to high acoustical transparency and thus extremely low coloration.

The PIANI-3 MiniCMIT is for Double M/S with the MiniCMIT shotgun, a CCM 4 and a CCM 8 microphone. The Pianissimo is a highly efficient windshield. Its special geometry leads to high acoustical transparency and thus extremely low coloration. At the same time the attenuation of wind noise is very high.

SCHOEPS offers the CMBI, a battery-powered microphone amplifier with unbalanced output. Combine this with one of 19 microphone capsules of the Colette series and you obtain a microphone which is acoustically equivalent to the balanced version using a CMC microphone amplifier.

Schoeps CMC 1 K
MICROPHONE AMPLIFIER
The CMC 1 K is identical to the CMC 1 U, but instead of a built-in XLR connector, it has an attached 5-meter (16.5') cable that ends on an XLR-3M connector.
The CMC 1 K is also available with a loose cable end in case the cable is to be further processed at the customer's site.

Miniature Microphone Amplifier, permanently attached cable, incl. SGC, premium case, Set including CMC 1 K (0,5m cable, Lemo-3pin Sound Devices), SGC, Premium case for CCM

Miniature Microphone Amplifier, permanently attached cable, incl. SGC, premium case, Set
including CMC 1 K (0,5m cable, Lemo-3pin Zaxcom), SGC, Premium case for CCM

132019
Miniature Microphone Amplifier, permanently attached laterally outgoing cable, incl. premium case and magnetic accesories, Set including CMC 1 KV (0,5m cable, Lemo-3pin Sound Devices), Premium case for CCM, Magnetic Pad 5 cm black, Magnetic angle piece 30°, Magnetic angle piece 45°, Disc magnet 20 mm, SG 20, Suction cup Ø 50 mm with magnet.

132020
Miniature Microphone Amplifier, permanently attached laterally outgoing cable, incl. premium case and magnetic accesories, Set including CMC 1 KV (0,5m cable, Lemo-3pin Zaxcom), Premium case for CCM, Magnetic Pad 5 cm black, Magnetic angle piece 30°, Magnetic angle piece 45°, Disc magnet 20 mm, SG 20, Suction cup Ø 50 mm with magnet

132018
Miniature Microphone Amplifier, permanently attached laterally outgoing cable, incl. premium case
and magnetic accesories, Set including CMC 1 KV (2 m cable, XLR3M), Premium case for
CCM, Magnetic Pad 5 cm black, Magnetic angle piece 30°, Magnetic angle piece 45°, Disc magnet
20 mm, SG 20, Suction cup Ø 50 mm with magnet

The CMC 1 L is our new, small Colette microphone amplifier, about one-third the length and 53% lighter than the CMC 6. It is compatible with all components of the Colette system and can be used in place of the CMC 6 without compromise, for all applications in which the size and weight of the microphone play a role.

Set contains: COSI-CMC1U, MK 41, CMC 1 U, SG 20, Premium case for CMC/MiniCMIT

Schoeps CMC 1 SO for A10
The CMC 1 SO is identical to the CMC 1 U, but instead of a built-in XLR connector, it has a permanently attached gooseneck and a Lemo-3pin output connector.

Schoeps CMC 1 SO for Zaxcom
The CMC 1 SO is identical to the CMC 1 U, but instead of a built-in XLR connector, it has a permanently attached gooseneck and a Lemo-3pin output connector.

The CMC 1 is a new, small Colette microphone amplifier, about one-third the size and 40% lighter than the CMC 6. It is compatible with all components of the Colette system and can be used in place of the CMC 6 without compromise, for all applications in which the size and weight of the microphone play a role.

Although the CMC 5 Vintage U has a more modern successor (the CMC 6 U), some people place a special value on its discrete circuitry, or require an exact match for an existing microphone amplifier of this same type. The CMC 5 Vintage U is designed exclusively for 48-Volt phantom powering.

The CMC 6 U is designed for standard 48- and 12-Volt phantom powering. Its circuitry recognizes the supply voltage and adjusts itself automatically.

Schoeps CMC 6xt U Microphone Amplifier, 40kHz, incl. SG 20