The RCMR microphone extension tube from Schoeps is identical in appearance to the well-known RC extension tubes of that company's "Colette" microphone series.

The RCMR microphone extension tube from Schoeps is identical in appearance to the well-known RC extension tubes of that company's "Colette" microphone series.

The RCMR microphone extension tube from Schoeps is identical in appearance to the well-known RC extension tubes of that company's "Colette" microphone series.

Schoeps RCMR: flat charge for output connector including installation

Two capsules from the Colette modular system are screwed onto the front end of the RCY active stereo extension tube.

Two capsules from the Colette modular system are screwed onto the front end of the RCY active stereo extension tube.

Two capsules from the Colette modular system are screwed onto the front end of the RCY active stereo extension tube.

The RG 12 connects two STR vertical support rods or any other rods with 12 mm in diameter. The angle may be adjusted over a wide range.

This swivel joint is used for mounting a Colette active extension tube (RC_) or extension tube of the CCM series (RL_) on an STR support rod.

The RG 88 can be used for attaching the double active extension tube R2C KC to an STR support rod with 12 mm diameter.

The K 5 LU adapter cable is included with the CCM _L, while the RG 8 swivel is included with the RL straight extension tube.

The K 5 LU adapter cable is included with the CCM _L, while the RG 8 swivel is included with the RL straight extension tube.

The K 5 LU adapter cable is included with the CCM _L, while the RG 8 swivel is included with the RL straight extension tube.

The Schoeps RLG 350 U is an elegant table tube for CCM _L compact microphones.

These goosenecks are used directly between capsules and amplifiers of the Colette series. For mounting in a table top, the AF 1 flange (not included) offers good isolation from solid-borne noise.

These goosenecks have a miniature Lemo plug for CCM _L compact microphones at the upper end and a short, rigid tube at the bottom. Above this tube the lower part is flexible.

The S 170 L is a gooseneck with Lemo connectors at both ends. This version is suggested particularly for installations in which the microphone cables have already been laid down, e.g. in theaters.

These goosenecks are used directly between capsules and amplifiers of the Colette series. For mounting in a table top, the AF 1 flange (not included) offers good isolation from solid-borne noise.

The cable can be brought out from the side of the gooseneck or, after resoldering the connector, from the center of the gooseneck on through the AF 1 (unit is delivered with cable exiting from the side).

A table microphone can be created with this gooseneck together with the AF 1 elastic suspension. The plug at the end of the tube is connected to the XLR-3 socket of the cable; both parts are then held by the AF 1.